TMPM363F10FG Toshiba, TMPM363F10FG Datasheet - Page 74

• Manufacturer Part Number: TMPM363F10FG
• Manufacturer: Toshiba

Specifications of TMPM363F10FG

• Product Summaries: Summary
• Lead Free: Yes
• Rohs Compatible Product(s): Available
• Rom (kbytes): 1024K
• Rom Type: Flash
• Ram (kbytes): 64K
• Number Of Pins: 100
• Package: LQFP(14x14)
• Vcc: 3V
• Cpu Mhz: 64
• Ssp (ch) Spi: 1
• I2c/sio (ch): 4
• Uart/sio (ch): 5
• Usb: Host
• Can: 1
• Ethernet: -
• External Bus Interface: Y
• Cs/wait Controller (ch): 4
• Dma Controller: 2
• 10-bit Da Converter: 8
• 10-bit Ad Converter: 8
• 12-bit Ad Converter: -
• 16-bit Timer / Counter: 16
• Motor / Igbt Control: -
• Real Time Clock: Y
• Watchdog Timer: Y
• Osc Freq Detect: -
• Clock Gear: Y
• Low-power Hold Function: Y
• Remote Control Interface: Y
• Hardware Cec Controller: Y
• Comparators: -
• Low-voltage Detector: -
• Etm Hardware Trace: 4-bit

6.5
Operation Mode
6.5
6.5.1
6.5.2
lowing section.
Operation Mode
Two operation modes, NORMAL and SLOW, are available. The features of each mode are described in the fol-
speed clock stopped. The SLOW mode reduces power consumption compared to the NORMAL mode.
CEC, remote control signal preprocessor (RMC) and key on wake-up (KWUP).
NORMAL mode
SLOW mode
Note 1: Be sure to stop peripheral functions except for the CPU, TMRB, RTC, I/O ports, CEC, RMC and KWUP be-
Note 2: In the SLOW mode, be sure not to perform reset using the Application Interrupt and Reset Control Regis-
This mode is to operate the CPU core and the peripheral hardware by using the high-speed clock.
It is shifted to the NORMAL mode after reset. The low-speed clock can also be used.
This mode is to operate the CPU core and the peripheral hardware by using the low-speed clock with high-
This mode allows only the following peripheral functions to operate: I/O ports, real-time clock (RTC),
fore switching to the SLOW mode.
ter <SYSRESETREQ> of the Cortex-M3 NVIC register.
Page 48
TMPM363F10FG