TMPM364F10FG Toshiba, TMPM364F10FG Datasheet - Page 593

• Manufacturer Part Number: TMPM364F10FG
• Manufacturer: Toshiba

Specifications of TMPM364F10FG

• Product Summaries: Summary
• Lead Free: Yes
• Rohs Compatible Product(s): Available
• Rom (kbytes): 1024K
• Rom Type: Flash
• Ram (kbytes): 64K
• Number Of Pins: 144
• Package: LQFP(20x20)
• Vcc: 3V
• Cpu Mhz: 64
• Ssp (ch) Spi: 1
• I2c/sio (ch): 5
• Uart/sio (ch): 12
• Usb: Host
• Can: 1
• Ethernet: -
• External Bus Interface: Y
• Cs/wait Controller (ch): 4
• Dma Controller: 2
• 10-bit Da Converter: -
• 10-bit Ad Converter: 16
• 12-bit Ad Converter: -
• 16-bit Timer / Counter: 16
• Motor / Igbt Control: -
• Real Time Clock: Y
• Watchdog Timer: Y
• Osc Freq Detect: -
• Clock Gear: Y
• Low-power Hold Function: Y
• Remote Control Interface: Y
• Hardware Cec Controller: Y
• Comparators: -
• Low-voltage Detector: -
• Etm Hardware Trace: 4-bit

16.6
16.6.1
Operation Mode
CANBCR1 and CANBCR2). Writes to the CANBCR1 and CANBCR2 are possible only when the CAN con-
troller is in configuration mode.
set. A write of "0" to the <CCR> bit sets the CAN controller to normal operation mode. After leaving config-
uration mode, the <CCE> bit is cleared to "0" and the power-up sequence starts. The power-up sequence de-
tects 11 consecutive recessive bits on the CAN bus line. After detection, the CAN controller is bus on and
ready for operation.
tion mode. After the CAN controller has entered configuration mode, the <CCE> bit is set to "1".
stamp counter (CANTSC), and the time stamp hold registers will be cleared.
The CAN controller needs initial setup before starting operation (setting of the bit configuration registers,
After reset, the CANMCR<CCR> and the CANGSR<CCE> are set to "1" and the configuration mode is
A write of "1" to the <CCR> bit sets the CAN controller to enter configuration mode from normal opera-
Figure 16-7 shows the flowchart of the initial setup of the CAN controller.
When the CAN controller enters into configuration mode, the CAN error counter (CANCEC), the time
Configuration Mode
Page 567
TMPM364F10FG