TMPM382FSFG Toshiba, TMPM382FSFG Datasheet - Page 377

• Manufacturer Part Number: TMPM382FSFG
• Manufacturer: Toshiba

Specifications of TMPM382FSFG

• Product Summaries: Summary
• Lead Free: Yes
• Rohs Compatible Product(s): Available
• Rom (kbytes): 64K
• Rom Type: Flash
• Ram (kbytes): 8K
• Number Of Pins: 64
• Package: QFP(14x14)
• Vcc: 5V
• Cpu Mhz: 40
• Ssp (ch) Spi: 1
• I2c/sio (ch): 1
• Uart/sio (ch): 3
• Usb: -
• Can: -
• Ethernet: -
• External Bus Interface: N
• Cs/wait Controller (ch): -
• Dma Controller: 2
• 10-bit Da Converter: -
• 10-bit Ad Converter: -
• 12-bit Ad Converter: 10
• 16-bit Timer / Counter: 6
• Motor / Igbt Control: Y
• Real Time Clock: 1
• Watchdog Timer: Y
• Osc Freq Detect: Y
• Clock Gear: Y
• Low-power Hold Function: -
• Remote Control Interface: Y
• Hardware Cec Controller: -
• Comparators: -
• Low-voltage Detector: Y
• Etm Hardware Trace: 2-bit

13 Serial channel (UART/SIO)
SC0CR
13.4.3 Control register
<RB8>:
<EVEN>:
<PE>:
<OERR>:
<PERR>:
<FERR>:
<SCLKS>:
<IOC>:
(Note)
bit Symbol
Read/Write
After reset
Function
Any error flag is cleared when read.
“0”: odd parity.
“1”: even parity.
The parity bit may be used only in the 7- or 8-bit UART mode.
Controls enabling/ disabling parity.
The parity bit may be used only in the 7- or 8-bit UART mode.
“0”: baud rate generator
Selects even or odd parity.
Error flag
Indicate overrun error, parity error, underrun error and framing error.
Selects input clock in the I/O interface mode.
9
“1”: SCLK0 pin input.
Selects edge for data transmission and reception.
“0”:
“1”:
th
bit of the received data in the 9 bits UART mode.
Receive
data bit 8
(For UART)
Data transmit/receive at rising edges of SCLK0
Data transmit/receive at falling edges of SCLK0
RB8
7
R
0
(see note)
Parity
(For UART)
0: Odd
1: Even
EVEN
6
0
R/W
TMPM380/M382 - 28 / 52 -
Add parity
(For UART)
0: Disabled
1: Enabled
PE
5
0
0: Normal operation
1: Error
Overrun
OERR
R (Cleared to “0” when read)
4
0
Parity/
underrun
PERR
3
0
Framing
FERR
2
0
0: SCLK0
1: SCLK0
SCLKS
TMPM380/M382
1
0
R/W
(For I/O
interface)
0:Baud rate
1:SCLK0
generator
pin input
IOC
0
0