ACS8530 Semtech Corporation, ACS8530 Datasheet - Page 149

• Manufacturer Part Number: ACS8530
• Description: Synchronous Equipment Timing Source For Stratum 2/3E/3 Systems
• Manufacturer: Semtech Corporation

The Revision Status of the datasheet, as shown in the
center of the datasheet header bar, may be TARGET,
PRELIMINARY, or FINAL, and refers to the status of the
Device (not the datasheet) within the design cycle.
TARGET status is used when the design is being realized
but is not yet physically available, and the datasheet
content reflects the intention of the design. The datasheet
is raised to PRELIMINARY status when initial prototype
devices are physically available, and the datasheet
content more accurately represents the realization of the
design. The datasheet is only raised to FINAL status after
Table 42 Revision History
Revision 3.01/October 2003 © Semtech Corp.
Revision Status/History
ADVANCED COMMUNICATIONS
1.00/February 2002
1.01/February 2002
1.02/March 2002
1.03/March 2002
1.04/April 2002
1.05/April 2002
1.06/May 2002
1.07/June 2002
1.08/January 2003
2.00/January 2003
3.00/September 2003 All Pages
3.01/October 2003
Revision
See particular revision
All Pages
Reg. 08, 09, 22, 30, 33, 38, 3D, 3E, 45, 64,
6A, 6B and 71..
Table 3, Table 5, Table 17, Table 29,
Table 34, Table 35, Table 43, and Figure 28.
“TO DPLL Main Features” on page 20,
“T4 DPLL Main Features” on page 20,
“Phase Detectors” on page 21,
“Crystal Frequency Calibration” on page 22,
“Input to Output Phase Adjustment” on
page 26,
“JTAG” on page 134,
“Abbreviations” on page 147
“References” on page 147.
“ESD Protection” on page 134,
“Latchup Protection” on page 134.
“Features” on page 1, and Reg. 31
Reference
FINAL
Page 149
the device has been fully characterized, and the
datasheet content updated with measured, rather than
simulated parameter values.
This is a FINAL release (Revision 3.01) of the ACS8530
datasheet. Changes made for this document revision are
given in Table 42, together with a brief summary of
previous revisions. For specific changes between earlier
revisions, refer (where available) to those earlier
revisions. Always use the current version of the datasheet.
Initial datasheet and minor revisions at Preliminary status
Refer to particular release for changes made for that release.
First public release (Preliminary).
Minor update.
Minor update.
Major revision, first at FINAL status and completely revised.
Major revision. All pages reformatted. General update of cross-
references.
Register descriptions updated.
Tables and Figures updated.
Sections updated.
New Sections inserted.
Feature list and Register Description updated.
Description of changes
ACS8530 SETS
DATASHEET
www.semtech.com