PN5110A0HN NXP [NXP Semiconductors], PN5110A0HN Datasheet - Page 10

• Manufacturer Part Number: PN5110A0HN
• Description: Transmission Module
• Manufacturer: NXP [NXP Semiconductors]

NXP Semiconductors
8. Operating modes
082733
Product short data sheet
8.1.1 ISO 14443A/Mifare reader/writer functionality
8.1 Reader/Writer mode
PN511 transceiver IC supports the following operating modes:
The modes support different transfer speeds and modulation schemes. The following
chapters will explain the different modes in detail.
Note: All indicated modulation indices and modes in this chapter are system parameters.
This means that beside the IC settings a suitable antenna tuning is required to achieve the
optimum performance.
Generally 2 Reader/Writer modes are supported. The PN511 can act as a reader/writer for
ISO 14443A/Mifare or FeliCa cards.
In the Reader/Writer mode the PN511 enables the communication to a contactless
ISO 14443A/Mifare or FeliCa card.
The ISO 14443A/Mifare Reader/Writer mode is the general reader to card communication
scheme according to the ISO 14443A/Mifare specification.The following diagram
describes the communication on a physical level, the communication table describes the
physical parameters.
Fig 4. Reader/Writer mode
Fig 5.
•
•
•
ISO14443A
Reader (PCD)
Reader/Writer mode supporting ISO 14443A/Mifare and FeliCa scheme
Card Operation mode supporting ISO 14443A/ Mifare and FeliCa scheme
NFCIP-1 mode
Battery
PN511
Reader / Writer
ISO 14443A/Mifare Reader/Writer mode communication diagram
PN511
Rev. 3.3 — 13 June 2007
1. PCD to PICC 100 % ASK ,
Miller Coded,
baudrate 106 to 424 kbaud
2. PICC to PCD, Subcarrier Loadmodulation,
Manchester Coded or BPSK,
baudrate 106 to 424 kbaud
Contactless Card
Transmission Module
ISO14443A or
FeliCa Card
ISO14443A
Card (PICC)
© NXP B.V. 2007. All rights reserved.
PN511
10 of 22