PN5110A0HN NXP [NXP Semiconductors], PN5110A0HN Datasheet - Page 15

• Manufacturer Part Number: PN5110A0HN
• Description: Transmission Module
• Manufacturer: NXP [NXP Semiconductors]

NXP Semiconductors
082733
Product short data sheet
Fig 10. Passive Communication mode
8.2.2 Passive Communication mode
Passive Communication mode means that the target answers to an initiator command in a
load modulation scheme. The initiator is active meaning generating the RF field.
Table 10.
The contactless UART of PN511 and a dedicated host controller are required to handle
the NFCIP-1 protocol.
Note: Transfer Speeds above 424 kbit/s are not defined in the NFCIP-1 standard. The
PN511 supports these transfer speeds only with dedicated external circuits.
Communication
direction
Initiator → Target According to
Target → Initiator According to
Communication Overview for Passive Communication mode
106 kbit/s
ISO 14443A
100% ASK,
Modified
Miller Coded
ISO 14443A
subcarrier load
modulation,
Manchester Coded
Rev. 3.3 — 13 June 2007
212 kbit/s
According to FeliCa, 8-30%
ASK Manchester Coded
According to FeliCa, >12%
ASK Manchester Coded
424 kbit/s
848 kbit/s
digital capability to handle
this communication
Transmission Module
© NXP B.V. 2007. All rights reserved.
PN511
1.69 Mbit/s,
3.39 Mbit/s
15 of 22