STEVAL-IHM015V1 STMicroelectronics, STEVAL-IHM015V1 Datasheet - Page 8

• Manufacturer Part Number: STEVAL-IHM015V1
• Description: BOARD EVAL ST7FMC2S4T6/STS8DNH3L
• Manufacturer: STMicroelectronics
• Type: Motor / Motion Controllers & Driversr

Specifications of STEVAL-IHM015V1

• Main Purpose: Power Management, Motor Control
• Embedded: Yes, MCU, 8-Bit
• Utilized Ic / Part: ST7FMC2S4, STS8DNH3LL
• Primary Attributes: 3-Ph BLAC, BLDC, PMAC or PMDC Motors
• Secondary Attributes: Graphical User Interface
• Input Voltage: 5 V to 48 V
• Product: Power Management Modules
• Silicon Manufacturer: ST Micro
• Core Architecture: ARM
• Core Sub-architecture: ARM7TDMI
• Silicon Core Number: ST7
• Silicon Family Name: ST7MCx
• Kit Contents: Board
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: ST7MC2S4, STS8DNH3LL
• Other names: 497-8213

Safety and operating instructions
2
2.1
2.2
2.3
2.4
8/53
Safety and operating instructions
General
All operations involving transportation, installation and use, as well as maintenance, should
be carried out by skilled technical personnel (national accident prevention rules must be
observed). Skilled technical personnel refers to suitably-qualified persons who are familiar
with the installation, use and maintenance of electronic power systems.
Intended use of the demonstration board
The STEVAL-IHM015V1 demonstration board is a component designed for demonstration
purposes only, and must not be used for electrical installations or machinery. Technical data
and information concerning the power supply conditions are detailed in the documentation
and should be strictly observed.
Installing the demonstration board
The installation and cooling of the demonstration kit boards must be in accordance with the
specifications and targeted application (see
●
●
●
Electronic connections
Applicable national accident prevention rules must be followed when working on the main
power supply with a motor drive. The electrical installation must be completed in accordance
with the appropriate requirements (for example, cross-sectional areas of conductors, fusing,
PE connections, etc). For further information, see
The motor drive converters must be protected against excessive strain. In particular,
components should not be bent or isolating distances altered during transportation or
handling.
No contact must be made with other electronic components and contacts.
The boards contain electrostatically-sensitive components that are prone to damage if
used incorrectly. Do not mechanically damage or destroy the electrical components
(potential health risks).
Warning:
During assembly and operation, the STEVAL-IHM015V1
demonstration board poses several inherent hazards,
including bare wires, moving or rotating parts and hot
surfaces. Serious personal injury and damage to property
may occur if the kit or its components are used or installed
incorrectly.
Section
Section
7).
7.
UM0432