DSPIC33FJ12MC201-I/SO Microchip Technology, DSPIC33FJ12MC201-I/SO Datasheet - Page 276

• Manufacturer Part Number: DSPIC33FJ12MC201-I/SO
• Description: IC DSPIC MCU/DSP 12K 20SOIC
• Manufacturer: Microchip Technology
• Series: dsPIC™ 33Fr

Specifications of DSPIC33FJ12MC201-I/SO

• Program Memory Type: FLASH
• Program Memory Size: 12KB (12K x 8)
• Package / Case: 20-SOIC (7.5mm Width)
• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 40 MIPs
• Connectivity: I²C, IrDA, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, Motor Control PWM, QEI, POR, PWM, WDT
• Number Of I /o: 15
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Product: DSCs
• Data Bus Width: 16 bit
• Processor Series: DSPIC33F
• Core: dsPIC
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 15
• Data Ram Size: 1 KB
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM240001, DV164033
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: DV164033 - KIT START EXPLORER 16 MPLAB ICD2DM240001 - BOARD DEMO PIC24/DSPIC33/PIC32
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

dsPIC33FJ12MC201/202
TABLE 25-1:
DS70265D-page 274
Section 17.0 “Inter-Integrated
Circuit™ (I
Section 18.0 “Universal
Asynchronous Receiver
Transmitter (UART)”
Section Name
2
C™)”
MAJOR SECTION UPDATES
Removed the following sections, which are now available in the related section
of the dsPIC33F Family Reference Manual:
• 17.3 “I
• 17.4 “Baud Rate Generator” (retained Figure 17-1: I
• 17.5 “I
• 17.6 “Slave Address Masking”
• 17.7 “IPMI Support”
• 17.8 “General Call Address Support”
• 17.9 “Automatic Clock Stretch”
• 17.10 “Software Controlled Clock Stretching (STREN = 1)”
• 17.11 “Slope Control”
• 17.12 “Clock Arbitration”
• 17.13 “Multi-Master Communication, Bus Collision, and Bus Arbitration
• 17.14 “Peripheral Pin Select Limitations
Removed the following sections, which are now available in the related section
of the dsPIC33F Family Reference Manual:
• 18.1 “UART Baud Rate Generator”
• 18.2 “Transmitting in 8-bit Data Mode
• 18.3 “Transmitting in 9-bit Data Mode
• 18.4 “Break and Sync Transmit Sequence”
• 18.5 “Receiving in 8-bit or 9-bit Data Mode”
• 18.6 “Flow Control Using UxCTS and UxRTS Pins”
• 18.7 “Infrared Support”
Removed IrDA references and Note 1, and updated the bit and bit value
descriptions for UTXINV (UxSTA<14>) in the UARTx Status and Control
Register (see Register 18-2).
2
2
C Interrupts”
C Module Addresses
Preliminary
Update Description
© 2009 Microchip Technology Inc.
2
C Block Diagram)