T89C5121-ICUIL Atmel, T89C5121-ICUIL Datasheet - Page 83

• Manufacturer Part Number: T89C5121-ICUIL
• Description: IC 8051 MCU W/SMART CARD 24SSOP
• Manufacturer: Atmel
• Series: 89Cr

Specifications of T89C5121-ICUIL

• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 16MHz
• Connectivity: SmartCard, UART/USART
• Peripherals: LED, POR, WDT
• Number Of I /o: 14
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: Flash RAM
• Eeprom Size: 16K x 8
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 2.85 V ~ 5.4 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 24-SSOP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Data Converters: -
• Other names: Q1468934; T89C5121-ICSIL; T89C5121-ICSIL

Broadcast Address
4164G–SCR–07/06
To address a device by its individual address, the SADEN mask byte must be 1111
1111b.
For example:
The following is an example of how to use given addresses to address different slaves:
The SADEN byte is selected so that each slave may be addressed separately.
For slave A, bit 0 (the LSB) is a don’t care bit; for slaves B and C, bit 0 is a 1. To commu-
nicate with slave A only, the master must send an address where bit 0 is clear (e.g.
1111 0000b).
For slave A, bit 1 is a 0; for slaves B and C, bit 1 is a don’t care bit. To communicate with
slaves A and B, but not slave C, the master must send an address with bits 0 and 1 both
set (e.g. 1111 0011b).
To communicate with slaves A, B and C, the master must send an address with bit 0 set,
bit 1 clear, and bit 2 clear (e.g. 1111 0001b).
A broadcast address is formed from the logical OR of the SADDR and SADEN registers
with zeros defined as don’t care bits, e.g.:
The use of don’t care bits provides flexibility in defining the broadcast address, however
in most applications, a broadcast address is FFh. The following is an example of using
broadcast addresses:
For slaves A and B, bit 2 is a don’t care bit; for slave C, bit 2 is set. To communicate with
all of the slaves, the master must send an address FFh. To communicate with slaves A
and B, but not slave C, the master can send and address FBh.
Slave A:SADDR1111 0001b
Slave B:SADDR1111 0011b
Slave C:SADDR1111 0011b
Slave A:SADDR1111 0001b
Slave B:SADDR1111 0011b
Slave C:SADDR = 1111 0010b
SADDR0101 0110b
SADEN1111 1100b
Given0101 01XXb
SADEN1111 1010b
Given1111 0X0Xb
SADEN1111 1001b
Given1111 0XX1b
SADEN1111 1101b
Given1111 00X1b
SADDR0101 0110b
SADEN1111 1100b
SADDR OR SADEN1111 111Xb
SADEN1111 1010b
Given1111 1X11b,
SADEN1111 1001b
Given1111 1X11B,
SADEN1111 1101b
Given1111 1111b
A/T8xC5121
83