P89LPC936FDH,518 NXP Semiconductors, P89LPC936FDH,518 Datasheet - Page 37

• Manufacturer Part Number: P89LPC936FDH,518
• Description: IC 80C51 MCU FLASH 16K 28TSSOP
• Manufacturer: NXP Semiconductors
• Series: LPC900r

Specifications of P89LPC936FDH,518

• Program Memory Type: FLASH
• Program Memory Size: 16KB (16K x 8)
• Package / Case: 28-TSSOP
• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 18MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LED, POR, PWM, WDT
• Number Of I /o: 26
• Eeprom Size: 512 x 8
• Ram Size: 768 x 8
• Voltage - Supply (vcc/vdd): 2.4 V ~ 3.6 V
• Data Converters: A/D 8x8b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: P89LPC9x
• Core: 80C51
• Data Bus Width: 8 bit
• Data Ram Size: 768 B
• Interface Type: I2C/SPI/UART
• Maximum Clock Frequency: 18 MHz
• Number Of Programmable I/os: 26
• Number Of Timers: 2
• Operating Supply Voltage: 21 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: PK51, CA51, A51, ULINK2
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8-ch x 8-bit
• On-chip Dac: 2-ch x 8-bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 622-1014 - BOARD FOR LPC9XX TSSOP622-1008 - BOARD FOR LPC9103 10-HVSON622-1006 - SOCKET ADAPTER BOARDMCB900K - BOARD PROTOTYPE NXP 89LPC9EPM900K - EMULATOR/PROGRAMMER NXP P89LPC9568-4000 - DEMO BOARD SPI/I2C TO DUAL UART568-3510 - DEMO BOARD SPI/I2C TO UART622-1002 - USB IN-CIRCUIT PROG LPC9XX568-1759 - EMULATOR DEBUGGER/PROGRMMR LPC9X568-1758 - BOARD EVAL FOR LPC93X MCU FAMILY
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 568-4339-2; 935277841518; P89LPC936FDH-T; P89LPC936FDH-T

NXP Semiconductors
P89LPC933_934_935_936
Product data sheet
8.19.7 Alternating output mode
8.19.8 PLL operation
In asymmetrical mode, the user can set up PWM channels A/B and C/D as alternating
pairs for bridge drive control. In this mode the output of these PWM channels are
alternately gated on every counter cycle.
The PWM module features a PLL that can be used to generate a CCUCLK frequency
between 16 MHz and 32 MHz. At this frequency the PWM module provides ultrasonic
PWM frequency with 10-bit resolution provided that the crystal frequency is 1 MHz or
higher. The PLL is fed an input signal from 0.5 MHz to 1 MHz and generates an output
signal of 32 times the input frequency. This signal is used to clock the timer. The user will
have to set a divider that scales PCLK by a factor from 1 to 16. This divider is found in the
SFR register TCR21. The PLL frequency can be expressed as shown in
Where: N is the value of PLLDV.3 to PLLDV.0.
Since N ranges from 0 to 15, the CCLK frequency can be in the range of PCLK to
PLL frequency
Fig 12. Alternate output mode
=
All information provided in this document is subject to legal disclaimers.
----------------- -
(
PCLK
N
+
1
Rev. 8 — 12 January 2011
)
8-bit microcontroller with accelerated two-clock 80C51 core
P89LPC933/934/935/936
002aaa895
TOR2
COMPARE VALUE A (or C)
COMPARE VALUE B (or D)
0
PWM OUTPUT (OCA or OCC)
PWM OUTPUT (OCB or OCD)
TIMER VALUE
© NXP B.V. 2011. All rights reserved.
Equation
PCLK
1.
37 of 77
⁄
(1)
16
.