AT90PWM1-16MU Atmel, AT90PWM1-16MU Datasheet - Page 117

• Manufacturer Part Number: AT90PWM1-16MU
• Description: IC AVR PWM 8KB FLASH 16MHZ 32QFN
• Manufacturer: Atmel
• Series: AVR® 90PWM Lightingr

Specifications of AT90PWM1-16MU

• Core Processor: AVR
• Core Size: 8-Bit
• Speed: 16MHz
• Connectivity: SPI
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 19
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 512 x 8
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 105°C
• Package / Case: 32-QFN
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

4378C–AVR–09/08
I/O pin it is connected to. However, note that the Data Direction Register (DDR) bit correspond-
ing to the OCnA or OCnB pin must be set in order to enable the output driver.
When the OCnA or OCnB is connected to the pin, the function of the COMnx1:0 bits is depen-
dent of the WGMn3:0 bits setting.
WGMn3:0 bits are set to a Normal or a CTC mode (non-PWM).
Table 29. Compare Output Mode, non-PWM
Table 30
mode.
Table 30. Compare Output Mode, Fast PWM
Note:
Table 31
rect or the phase and frequency correct, PWM mode.
Table 31. Compare Output Mode, Phase Correct and Phase and Frequency Correct PWM
COMnA1/COMnB1
COMnA1/COMnB1
COMnA1/COMnB1
1. A special case occurs when OCRnA/OCRnB equals TOP and COMnA1/COMnB1 is set. In
shows the COMnx1:0 bit functionality when the WGMn3:0 bits are set to the phase cor-
shows the COMnx1:0 bit functionality when the WGMn3:0 bits are set to the fast PWM
0
0
1
1
0
0
1
1
0
0
1
1
this case the compare match is ignored, but the set or clear is done at TOP.
Mode” on page 109.
COMnA0/COMnB0
COMnA0/COMnB0
COMnA0/COMnB0
for more details.
0
1
0
1
0
1
0
1
0
1
0
1
Table 29
(1)
Description
Normal port operation, OCnA/OCnB disconnected.
Toggle OCnA/OCnB on Compare Match.
Clear OCnA/OCnB on Compare Match (Set output to
low level).
Set OCnA/OCnB on Compare Match (Set output to
high level).
Description
Normal port operation, OCnA/OCnB disconnected.
WGMn3:0 = 14 or 15: Toggle OC1A on Compare
Match, OC1B disconnected (normal port operation).
For all other WGM1 settings, normal port operation,
OC1A/OC1B disconnected.
Clear OCnA/OCnB on Compare Match, set
OCnA/OCnB at TOP
Set OCnA/OCnB on Compare Match, clear
OCnA/OCnB at TOP
Description
Normal port operation, OCnA/OCnB disconnected.
WGMn3:0 = 8, 9 10 or 11: Toggle OCnA on Compare
Match, OCnB disconnected (normal port operation).
For all other WGM1 settings, normal port operation,
OC1A/OC1B disconnected.
Clear OCnA/OCnB on Compare Match when up-
counting. Set OCnA/OCnB on Compare Match when
downcounting.
Set OCnA/OCnB on Compare Match when up-
counting. Clear OCnA/OCnB on Compare Match
when downcounting.
shows the COMnx1:0 bit functionality when the
AT90PWM1
See “Fast PWM
(1)
117