AT91SAM9G45-CU-999 Atmel, AT91SAM9G45-CU-999 Datasheet - Page 822

• Manufacturer Part Number: AT91SAM9G45-CU-999
• Description: IC MCU ARM9 APMC 324TFBGA
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91SAM9G45-CU-999

• Core Processor: ARM9
• Core Size: 16/32-Bit
• Speed: 400MHz
• Connectivity: EBI/EMI, Ethernet, I²C, IrDA, MMC, SPI, SSC, UART/USART, USB
• Peripherals: AC'97, DMA, I²S, LCD, POR, PWM, WDT
• Number Of I /o: 160
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: ROM
• Ram Size: 128K x 8
• Voltage - Supply (vcc/vdd): 0.9 V ~ 1.1 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 324-TFBGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Supplier Unconfirmed

822
AT91SAM9G45
Thus the USB Host peripheral receives three clocks from the Power Management Controller
(PMC): the Peripheral Clock (MCK domain), the UHP48M and the UHP12M (built-in UHP48M
divided by four) used by the OHCI to interface with the bus USB signals (Recovered 12 MHz
domain) in Full-speed operations.
For High-speed operations, the user has to perform the following:
For OHCI Full-speed operations only, the user has to perform the following:
• Enable UHP peripheral clock, bit (1 << AT91C_ID_UHPHS) in PMC_PCER register.
• Write CKGR_PLLCOUNT field in PMC_UCKR register.
• Enable UPLL, bit AT91C_CKGR_UPLLEN in PMC_UCKR register.
• Wait until UTMI_PLL is locked. LOCKU bit in PMC_SR register
• Enable BIAS, bit AT91C_CKGR_BIASEN in PMC_UCKR register.
• Select UPLLCK as Input clock of OHCI part, USBS bit in PMC_USB register.
• Program the OHCI clocks (UHP48M and UHP12M) with USBDIV field in PMC_USB register.
• Enable OHCI clocks, UHP bit in PMC_SCER register.
• Enable UHP peripheral clock, bit (1 << AT91C_ID_UHPHS) in PMC_PCER register.
• Select PLLACK as Input clock of OHCI part, USBS bit in PMC_USB register.
• Program the OHCI clocks (UHP48M and UHP12M) with USBDIV field in PMC_USB register.
• Enable the OHCI clocks, UHP bit in PMC_SCER register.
USBDIV must be 9 (division by 10) if UPLLCK is selected.
USBDIV value is to calculated regarding the PLLACK value and USB Full-speed accuracy.
6438F–ATARM–21-Jun-10