SAK-XC2785X-104F80L AA Infineon Technologies, SAK-XC2785X-104F80L AA Datasheet - Page 91

• Manufacturer Part Number: SAK-XC2785X-104F80L AA
• Description: IC MCU 32BIT FLASH 144-LQFP
• Manufacturer: Infineon Technologies
• Series: XC27x5Xr

Specifications of SAK-XC2785X-104F80L AA

• Core Processor: C166SV2
• Core Size: 16/32-Bit
• Speed: 80MHz
• Connectivity: CAN, EBI/EMI, I²C, LIN, SPI, SSC, UART/USART, USI
• Peripherals: I²S, POR, PWM, WDT
• Number Of I /o: 116
• Program Memory Size: 832KB (832K x 8)
• Program Memory Type: FLASH
• Ram Size: 50K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 24x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 144-LFQFP
• Data Bus Width: 16 bit, 32 bit
• Data Ram Size: 32 KB
• Interface Type: I2C, SPI, UART
• Maximum Clock Frequency: 80 MHz
• Number Of Programmable I/os: 119
• Number Of Timers: 5
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 24 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: SP000439080

XC2785X
XC2000 Family Derivatives / Base Line
Electrical Parameters
1)The pad supply voltage pins (
) provide the input current for the on-chip EVVRs
V
DDPB
and the current consumed by the pin output drivers. A small current is consumed
because the drivers’ input stages are switched.
2) Please consider the additional conditions described in section “Active Mode Power Supply Current”.
3) The pad supply voltage has only a minor influence on this parameter.
Active Mode Power Supply Current
The actual power supply current in active mode not only depends on the system
frequency but also on the configuration of the XC2785X’s subsystem.
Besides the power consumed by the device logic
(Table
16) the power supply pins also
provide the current that flows through the pin output drivers.
A small current is consumed because the drivers’ input stages are switched.
V
The IO power domains can be supplied separately. Power domain A (
) supplies the
DDPA
V
A/D converters and Port 6. Power domain B (
) supplies the on-chip EVVRs and all
DDPB
other ports.
During operation domain A draws a maximum current of 1.5 mA for each active A/D
V
converter module from
.
DDPA
In Fast Startup Mode (with the Flash modules deactivated), the typical current is reduced
f
to 3 + 0.6×
mA.
SYS
Data Sheet
91
V2.0, 2009-03