MCIMX31LVKN5 Freescale Semiconductor, MCIMX31LVKN5 Datasheet - Page 41

• Manufacturer Part Number: MCIMX31LVKN5
• Description: IC MPU MAP I.MX31L 457-MAPBGA
• Manufacturer: Freescale Semiconductor
• Series: i.MX31r

Specifications of MCIMX31LVKN5

• Core Processor: ARM11
• Core Size: 32-Bit
• Speed: 532MHz
• Connectivity: 1-Wire, ATA, EBI/EMI, FIR, I²C, MMC/SD, PCMCIA, SIM, SPI, SSI, UART/USART, USB, USB OTG
• Peripherals: DMA, LCD, POR, PWM, WDT
• Program Memory Type: ROMless
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 1.22 V ~ 3.3 V
• Oscillator Type: External
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 457-MAPBGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Number Of I /o: -
• Eeprom Size: -
• Program Memory Size: -
• Data Converters: -

4.3.9.2
All WEIM output control signals may be asserted and deasserted by internal clock related to BCLK rising
edge or falling edge according to corresponding assertion/negation control fields. Address always begins
related to BCLK falling edge but may be ended both on rising and falling edge in muxed mode according
to control register configuration. Output data begins related to BCLK rising edge except in muxed mode
where both rising and falling edge may be used according to control register configuration. Input data,
ECB and DTACK all captured according to BCLK rising edge time.
WEIM module, and
Freescale Semiconductor
Wireless External Interface Module (WEIM)
High is defined as 80% of signal value and low is defined as 20% of signal
value.
Timing for HCLK is 133 MHz and internal NFC clock (flash clock) is
approximately 33 MHz (30 ns). All timings are listed according to this NFC
clock frequency (multiples of NFC clock phases), except NF16 and NF17,
which are not NFC clock related.
Table 33
lists the timing parameters.
MCIMX31/MCIMX31L Technical Data, Rev. 4.1
NOTE
Figure 27
depicts the timing of the
Electrical Characteristics
41