RN-134-K Roving Networks Inc, RN-134-K Datasheet - Page 13

• Manufacturer Part Number: RN-134-K
• Description: KIT EVAL WIFLY GSX 802.11 RN-134
• Manufacturer: Roving Networks Inc
• Type: Transceiver, 802.11 b/gr

Specifications of RN-134-K

• Frequency: 2.4GHz
• Wireless Frequency: 2402 MHz to 2480 MHz
• Interface Type: RS-232, UART
• Modulation: CKK, DSSS, DBPSK, DQPSK, OFDM
• Security: 128 WEP, WPA, TKIP
• Operating Voltage: 3 V to 12 V
• Operating Temperature Range: - 40 C to + 85 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: RN-134
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 740-1035

set comm time <num>
set dns address <addr>
set dns name <string>
set dns backup <string>
set ftp filename <file>
set ftp addr <addr>
set ftp remote <port>
set ftp user <name>
set ftp pass <pass>
5.4. DNS Parameters
5.5. FTP Parameters
www.rovingnetworks.com
809 University Avenue
•
Los Gatos, CA 95032
possible setting to maximize TCP/IP performance. Maximum value =
1420 (at 9600) bytes.
NOTE: This value is set automatically when the baudrate is set, in an
attempt to optimize the link. It is assumed that higher baudrates equates
to more data and hence the flush size is increased.
Flush size is one of three ways to control TCP/IP packet forwarding. The
others are match character and timer. For more information see section
10.4 on UART Receiver.
sets the flush timer. An IP packet will be sent if no additional bytes are
received for “num” milliseconds. Num is one milliseconds interval. 1 is
the minimum value. Default is 10 (10 milliseconds). Setting this value to 0
will disable forwarding based on the flush timer.
Flush timer is one of three ways to control TCP/IP packet forwarding.
The others are match character and size. For more information see section
10.1 on System Timers and Auto Connect Timers
sets the IP address of the DNS sever. This is auto-set when using DHCP,
and needs to be set in STATIC IP or Auto-IP modes.
sets the name of the host for TCP/IP connections.
sets the name of the backup host for TCP/IP connections.
sets the name of the file transferred when issuing the “ftp u” or “ftp g”
commands.
sets the ftp server IP address.
sets the ftp server remote port number (default is 21).
sets the ftp user name for accessing the FTP server.
sets the ftp password for accessing the FTP server.
~ 13 ~
•
Tel [phone]
• [e-mail]
WiFlyGSX-um
WiFly GSX
9/16/2010