RN-134-K Roving Networks Inc, RN-134-K Datasheet - Page 25

• Manufacturer Part Number: RN-134-K
• Description: KIT EVAL WIFLY GSX 802.11 RN-134
• Manufacturer: Roving Networks Inc
• Type: Transceiver, 802.11 b/gr

Specifications of RN-134-K

• Frequency: 2.4GHz
• Wireless Frequency: 2402 MHz to 2480 MHz
• Interface Type: RS-232, UART
• Modulation: CKK, DSSS, DBPSK, DQPSK, OFDM
• Security: 128 WEP, WPA, TKIP
• Operating Voltage: 3 V to 12 V
• Operating Temperature Range: - 40 C to + 85 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: RN-134
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 740-1035

exit
factory RESET
join <ssid>
join # <num>
leave
lookup <hostname>
open <addr> <port>
ping <g | h | i | addr> <num>
reboot
www.rovingnetworks.com
809 University Avenue
•
Los Gatos, CA 95032
exit command mode. Exit command mode. “EXIT” will be displayed.
Loads factory defaults into the RAM configuration. Note that the
RESET must be capitalized. This command also writes the settings out
to the standard config file. After this command the module then needs to
be rebooted for settings to take effect.
joins the network <ssid>. If network is security enabled you must set the
pass phrase with the set wlan phrase command prior to issuing the join
command
join a network from the scan list. <num> is the entry number in the scan
list that is returned from the scan command. If network is security
enabled you must set the pass phrase with the set wlan phrase command
prior to issuing the join command
disconnects the module from the currently associated Access Point.
performs a DNS query on the supplied hostname.
opens a TCP connection to the given IP port and address. If no arguments
are provided, the device will attempt to connect to the stored remote host
IP address and remote port number. <addr> can also be a DNS hostname
and will be resolved if entered.
ping remote host. Default sends 1 packet. Optional <num> sends <num>
pings at 10 per second.
Ping 10.20.20.12 10 – pings IP address 10 times
ping g
is turned on, otherwise it should be set with the set ip gateway <addr>
command
ping h
with the set ip host <addr> command
ping i
resolving the URL (proves that DNS is working and proves the device has
internet connectivity).
ping 0
forces a reboot of the device (similar to power cycle)
pings the gateway, the gateway IP address is loaded if DHCP
pings the stored host IP address, the host IP address can be set
pings a known Internet server at www.neelum.com by first
terminates a ping command
~ 25 ~
•
Tel [phone]
• [e-mail]
WiFlyGSX-um
WiFly GSX
9/16/2010