RN-134-K Roving Networks Inc, RN-134-K Datasheet - Page 46

• Manufacturer Part Number: RN-134-K
• Description: KIT EVAL WIFLY GSX 802.11 RN-134
• Manufacturer: Roving Networks Inc
• Type: Transceiver, 802.11 b/gr

Specifications of RN-134-K

• Frequency: 2.4GHz
• Wireless Frequency: 2402 MHz to 2480 MHz
• Interface Type: RS-232, UART
• Modulation: CKK, DSSS, DBPSK, DQPSK, OFDM
• Security: 128 WEP, WPA, TKIP
• Operating Voltage: 3 V to 12 V
• Operating Temperature Range: - 40 C to + 85 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: RN-134
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 740-1035

set option format <value> Bitmapped value.
Bit of Format reg
Example:
To automatically send HTML data header, the command is set option format 1
To append sensor data in ASCII hex format, the command is set option format 7
WiFly module can be setup to automatically post data to a web server. The auto connect feature is enabled
by the set sys auto <seconds> command. For example, the WiFly module can be configured to connect to
the web server every 10 seconds by using the set sys auto 10.
The example below illustrates the commands to configure WiFly for connecting to the web server every 30
seconds.
set com remote GET$/ob.php?obvar=WEATHER
set sys auto 30
set option format 1
set ip proto 18
NOTE1: when HTTP mode is set, the WiFly automatically appends the \n\n to the end of the packet.
NOTE2: if the html header contains spaces, the $ is required when entering the string. Space is the
command delimiter. When WiFly command parser sees $ it will convert this to a SPACE character.
WiFly GSX supports a mode in which it can connect to the web server when it receives uart data. In this
mode, connection to the web server will be triggered on uart data.
13.2.
13.3.
www.rovingnetworks.com
809 University Avenue
0
1
2
3
4
Automatically periodically connect to web server
Automatically connect to web server on uart data
Function
Automatically send HTML data header based on broadcast interval.
Send users BINARY data (converted to ASCII hex )
Sample the GPIO and AtoD pins and format to ASCII hex
Appends &id= < value>, where value is the device ID string set with
set opt device <string>
Appends &rtc=<time>, where time is real time clock value in
message as 32 bit HEX value in format aabbccddeeff
// turn on HTTP mode=0x10 + TCP mode = 0x2
// auto send the header once connection is open
•
// auto connect every 30 seconds.
Los Gatos, CA 95032
~ 46 ~
•
Tel [phone]
// setup the string
• [e-mail]
WiFlyGSX-um
WiFly GSX
9/16/2010