EM260-RTR Ember, EM260-RTR Datasheet - Page 61

• Manufacturer Part Number: EM260-RTR
• Description: IC ZIGBEE SYSTEM-ON-CHIP 40-QFN
• Manufacturer: Ember

Specifications of EM260-RTR

• Frequency: 2.4GHz
• Data Rate - Maximum: 250kbps
• Modulation Or Protocol: 802.15.4
• Applications: ZigBee™
• Power - Output: -32dBm ~ 3dBm
• Sensitivity: -97dBm
• Voltage - Supply: 2.1 V ~ 3.6 V
• Current - Receiving: 30mA
• Current - Transmitting: 34mA
• Data Interface: PCB, Surface Mount
• Antenna Connector: PCB, Surface Mount
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 40-QFN
• For Use With: 636-1009 - PROGRAMMER USB FLASH EM250/260
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Memory Size: -
• Other names: 636-1007-2; EM260-RTR

Name: setEncryptionKey
Description: Sets the encryption key used to encrypt and decrypt radio messages. This function does not work
if the stack is already associated with a network.
Command Parameters:
int8u[16] key
int8u keySequenceNumber
Response Parameters:
EmberStatus status
Name: setManufacturerCode
Description: Sets the manufacturer code to the specified value. The manufacturer code is one of the fields of
the node descriptor.
Command Parameters:
int16u code
Response Parameters: None
Name: setPowerDescriptor
Description: Sets the power descriptor to the specified value. The power descriptor is a dynamic value,
therefore you should call this function whenever the value changes.
Command Parameters:
int16u descriptor
Response Parameters: None
Name: networkInit
Description: Resume network operation after a reboot. The node retains its original type. This should be
called on startup whether or not the node was previously part of a network. EMBER_NOT_JOINED is returned if
the node is not part of a network.
Command Parameters: None
Response Parameters:
EmberStatus status
A pointer to a 16-byte encryption key.
The sequence number associated with this key.
The manufacturer code for the local node.
ID: 0x14
An EmberStatus value indicating success or the reason for fail-
ure.
ID: 0x15
ID: 0x16
The new power descriptor for the local node.
ID: 0x17
An EmberStatus value that indicates one of the following: suc-
cessful initialization, EMBER_NOT_JOINED if the node is not part
of a network, or the reason for failure.
120-1003-000D
EM260
61