EM260-RTR Ember, EM260-RTR Datasheet - Page 66

• Manufacturer Part Number: EM260-RTR
• Description: IC ZIGBEE SYSTEM-ON-CHIP 40-QFN
• Manufacturer: Ember

Specifications of EM260-RTR

• Frequency: 2.4GHz
• Data Rate - Maximum: 250kbps
• Modulation Or Protocol: 802.15.4
• Applications: ZigBee™
• Power - Output: -32dBm ~ 3dBm
• Sensitivity: -97dBm
• Voltage - Supply: 2.1 V ~ 3.6 V
• Current - Receiving: 30mA
• Current - Transmitting: 34mA
• Data Interface: PCB, Surface Mount
• Antenna Connector: PCB, Surface Mount
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 40-QFN
• For Use With: 636-1009 - PROGRAMMER USB FLASH EM250/260
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Memory Size: -
• Other names: 636-1007-2; EM260-RTR

EM260
66
120-1003-000D
Name: scanErrorHandler
Description: This callback is invoked if an error occurs while attempting to
JoinNetwork
This frame is a response to the
Response Parameters:
EmberStatus status
Name: leaveNetwork
Description: Causes the stack to leave the current network. This generates a
indicate that the network is down. The radio will not be used until after sending a
work
Command Parameters: None
Response Parameters:
EmberStatus status
Name: mobileNodeHasMoved
Description: Informs the stack that contact with the network has been lost. Only devices that are joined to a
network with a node type of EMBER_MOBILE_END_DEVICE may call this function. This generates a
sHandler
network. A second
Command Parameters: None
Response Parameters:
EmberStatus status
Name: permitJoining
Description: Tells the stack to allow other nodes to join the network with this node as their parent. Joining is
initially disabled by default.
Command Parameters:
int8u duration
Response Parameters:
EmberStatus status
command.
callback to indicate that the network is down. The stack will try to re-establish contact with the
.
stackStatusHandler
callback
callback indicates either the success or the failure of the attempt.
command.
ID: 0x51
An EmberStatus value indicating the reason for the
FormNetwork
ID: 0x20
An EmberStatus value indicating success or the reason for fail-
ure.
ID: 0x21
An EmberStatus value indicating success or the reason for fail-
ure.
ID: 0x22
A value of 0x00 disables joining. A value of 0xFF enables joining.
Any other value enables joining for that number of seconds.
An EmberStatus value indicating success or the reason for fail-
ure.
or
scanAndJoinNetwork
scanAndFormNetwork
stackStatusHandler
formNetwork
failure.
or
scanAnd-
or
stackStatu-
joinNet-
callback to
scanAnd-