TDA5100 Infineon Technologies, TDA5100 Datasheet - Page 15

no-image

TDA5100

Manufacturer Part Number
TDA5100
Description
TRANSMITTER ASK/FSK P-TSSOP-16
Manufacturer
Infineon Technologies
Datasheet

Specifications of TDA5100

Frequency
433 ~ 435MHz; 866 ~ 870MHz
Applications
Alarm Systems, Communication Systems
Modulation Or Protocol
ASK, FSK
Data Rate - Maximum
20 kbps
Power - Output
5dBm
Current - Transmitting
7mA
Data Interface
PCB, Surface Mount
Antenna Connector
PCB, Surface Mount
Voltage - Supply
2.1 V ~ 4 V
Operating Temperature
-25°C ~ 85°C
Package / Case
16-TSSOP
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Features
-
Memory Size
-
Lead Free Status / RoHS Status
Lead free / RoHS Compliant, Lead free / RoHS Compliant
Other names
SP000016393
TDA5100INTR

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
TDA5100
Quantity:
5 400
Part Number:
TDA5100B2
Manufacturer:
INFINEON
Quantity:
1 228
Part Number:
TDA5100B2
Manufacturer:
INFINEON/英飞凌
Quantity:
20 000
Part Number:
TDA5100B3
Manufacturer:
INFINEON/英飞凌
Quantity:
20 000
Part Number:
TDA5100GEG
Manufacturer:
INFINEON/英飞凌
Quantity:
20 000
Wireless Components
3.4 Functional Blocks
3.4.1 PLL Synthesizer
The Phase Locked Loop synthesizer consists of a Voltage Controlled Oscillator
(VCO), an asynchronous divider chain, a phase detector, a charge pump and a
loop filter. It is fully implemented on chip. The tuning circuit of the VCO consist-
ing of spiral inductors and varactor diodes is on chip, too. Therefore no addi-
tional external components are necessary. The nominal center frequency of the
VCO is 869 MHz. The oscillator signal is fed both, to the synthesizer divider
chain and to the power amplifier. The overall division ratio of the asynchronous
divider chain is 128 in case of a 6.78 MHz crystal or 64 in case of a 13.56 MHz
crystal and can be selected via CSEL (pin 16). The phase detector is a Type IV
PD with charge pump. The passive loop filter is realized on chip.
3.4.2 Crystal Oscillator
The crystal oscillator operates either at 6.78 MHz or at 13.56 MHz.
The reference frequency can be chosen by the signal at CSEL (pin 16).
For both quartz frequency options, 847.5 kHz or 3.39 MHz are available as out-
put frequencies of the clock output CLKOUT (pin 8) to drive the clock input of a
micro controller.
The frequency at CLKOUT (pin 8) is controlled by the signal at CLKDIV (pin 9)
Table 3-3
Table 3-4
1) Low:
2) Open:
1) Low:
2) Open:
CLKDIV (pin 9)
CSEL (pin 16)
Open
Open
Low
Low
Voltage at pin < 0.2 V
Pin open
Voltage at pin < 0.2 V
Pin open
1)
1)
2)
2)
3 - 8
CLKOUT Frequency
Crystal Frequency
13.56 MHz
847.5 kHz
Functional Description
6.78 MHz
3.39 MHz
Specification, June 2001
TDA 5100

Related parts for TDA5100