C40K-CDR-A Omron, C40K-CDR-A Datasheet - Page 169

• Manufacturer Part Number: C40K-CDR-A
• Description: PROGRAMMABLE CONTROLLER CPU
• Manufacturer: Omron

Specifications of C40K-CDR-A

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Program Backup and Restore Operations
7-4-1
158
Error Messages
Key Sequence
Saving Program Memory Data
1, 2, 3...
The PC must be in PROGRAM mode for all cassette tape operations.
While the operation is in progress, the cursor will blink and the block count
will be incremented on the display.
Cassette tape operations may be halted at any time by pressing the CLR key.
The following error messages may appear during cassette tape operations.
This operation is used to copy the content of Program Memory to a cassette
tape. The procedure is as follows:
Program saving continues until END(01) or the final address is reached.
Cancel by pressing the CLR key.
Message
0000 ERR *******
FILE NO.********
**** MT VER ERR
**** MT ERR
Press EXT.
Input a file number for the data that is to be saved.
Start cassette tape recording.
Within 5 seconds, press the SHIFT and REC/RESET keys.
Meaning and appropriate response
File number on cassette and designated file number are
not the same. Repeat the operation using the correct file
number.
Cassette tape contents differs from that in the PC. Check
content of tape and/or the PC.
Cassette tape is faulty. Replace it with another.
Section 7-4