NT600SST211BEV3 Omron, NT600SST211BEV3 Datasheet - Page 296

• Manufacturer Part Number: NT600SST211BEV3
• Description: Controllers, Display
• Manufacturer: Omron

Specifications of NT600SST211BEV3

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant, Lead free / RoHS Compliant

7-3-4 Inserting Mark Data into a Character String
284
Character String Memory Table (String Table)
Note
One word corresponds to 2 characters.
A character string is allocated to the PC (PLC) words in units of 2 characters, be-
ginning with the leftmost character, from lower digit words to higher digit words.
The data type is 1-byte or 2-byte.
If the number of characters in a character string memory table entry (string table)
is larger than the number of words used, the number of characters equal to the
number of specified words is sent to the PC (PLC) beginning with the start of the
character string.
PLC Address
Specify the PC (PLC) address (start address) of the area where character string
memory table entries (string table) are allocated.
I/O Comment
Specify a comment for a PC (PLC) word.
A comment can comprise up to 16 characters.
Ref
Displays whether the table entry with the specified number is already used or not.
Yes: Already used as an element.
No:
If the indication is Yes, you can check where the table entry in question is used by
clicking on
character string memory table entry (string table) from the property dialog box of
an element.
(For details of
To insert mark data into an initial value, follow the steps described below.
(1) After specifying the Value field, move the cursor to the position where the
(2) Click on
(3) Specify the mark data in the list of mark data.
(4) Click on
Character string memory table
(String table)
mark data is to be inserted.
The Show Mark dialog box is displayed.
ABCDEFG
HIJKLMN
Not used.
If setting is 2 words.
If setting is 4 words.
. Note that this operation is not possible when setting a
.
, refer to 7-1-1 Reference Operation.)
.
Words allocated in PC (PLC)
CD
AB
LM
JK
HI
N
The character string is sent in units of 2
characters, beginning with the leftmost
character in the character string, and
allocated to words from lower word to
higher word.
00 (hexadecimal) is entered in blank
areas.
* EFG is not sent.
Section
7-3