NT600SST211BEV3 Omron, NT600SST211BEV3 Datasheet - Page 487

• Manufacturer Part Number: NT600SST211BEV3
• Description: Controllers, Display
• Manufacturer: Omron

Specifications of NT600SST211BEV3

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant, Lead free / RoHS Compliant

Data Conversion
Correction of touch switch position and size
Correction related to a touch switch for which a pop-up window/keyboard function is set
S Conversion result, error message and corrective action
Touch switch size differs between NT20S, NT600S, NT620S and other PT mod-
els.
Therefore, when the data of NT20S, NT600S, NT620S is converted to the data
for other PT models, touch switch position and size may change.
S Conversion result, error message and corrective action
If a touch switch assigned the pop-up window/keyboard function is converted be-
tween a conventional and a new model, conversion is executed in the manner
shown below due to differences in the range of screen numbers of the touch
switch window/keyboard screen.
S Difference
New models:
Conventional models:
With a conventional
model, an alarm list/
history is registered
for a screen and
touch switches are
associated with it.
With a conventional
model, an alarm list/
history is registered
for a screen (with-
out control touch
switches).
With a new model,
touch switches are
automatically
created by register-
ing alarm list/history
to the symbol man-
ager.
Status before
Conversion
Status before
Conversion
Touch switch posi-
tion and size may
change.
With a new model,
the associated
touch switches are
deleted and the
control touch
switches (in the ini-
tial state) are auto-
matically created.
When converted to
the NT21,
NT31/631-V2 or lat-
er models
(NT20/30/620-com-
patible mode on)
associated touch
switches will be
converted to control
touch switches, oth-
er properties re-
maining the same.
With a new model,
control touch
switches (in the ini-
tial state) are auto-
matically created.
With a conventional
model, all control
touch switches are
deleted.
Status after
Conversion
Status after
Conversion
Screen numbers of window/keyboard screen:
Screen numbers of window/keyboard screen:
1 to 3999
1900 to 1979
[E]
Touch Switch func-
tion type is not sup-
ported. It is dis-
carded.
[W]
The associated
touch switches of
the alarm has been
discarded and com-
ponent touch
switches have been
created.
No error message
will be generated.
[W]
The associated
touch switches of
the alarm has been
discarded and com-
ponent touch
switches have been
created.
[W]
The component
Touch Switches of
the Alarm List will
be discarded.
Error Message
Error Message
––
Correct the touch switch
position and size as
needed. (Refer to 6-8
Touch Switches)
Adjust the position of
control touch switches if
necessary. (Refer to 6-3
Alarm.)
Adjust the position of
control touch switches if
necessary. (Refer to 6-3
Alarm.)
If control touch switches
are not necessary, de-
lete them by setting in
the alarm list/history
properties. (Refer to 6-3
Alarm.)
Create the control touch
switches using the touch
switch control code input
function and associate
them with the alarm list/
history. (Refer to 6-8-5
Control Code Input
Touch Switches.)
Corrective Action
Corrective Action
Appendix A
475