NT600SST211BEV3 Omron, NT600SST211BEV3 Datasheet - Page 302

• Manufacturer Part Number: NT600SST211BEV3
• Description: Controllers, Display
• Manufacturer: Omron

Specifications of NT600SST211BEV3

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant, Lead free / RoHS Compliant

290
Bit Memory Table
S NT30, NT30C, NT620S, NT620C, and NT625C
S NT21, NT31, NT31C, NT631, and NT631C
String Table Entry
Specify the character string memory table entry (string table) number where the
character string that is displayed as a message is stored when the bit memory
table entry goes ON or the bit memory table entry registered for the alarm history
is displayed.
Image/Library Code
If you want to display image data or library data when a message is selected, set
a check mark in the check box and specify the image/library code after clicking on
Color – Foreground
Specify the color in which the message display field is displayed when a mes-
sage is selected.
(Can only be set for PTs with color display.)
White, black, blue, red, magenta, green, cyan, yellow
S Code setting in the image/library code field
Specify the screen No. of the screen to which the screen should switch by the
operation of the alarm list/history. Specify 0 if you do not switch the screen.
Specify the screen No. of the screen to be displayed if a check mark is set for
[Switch Screen]. The setting for this item is not valid unless a check mark is set
for [Switch Screen].
When setting a code in the image/library code field, the desired code can be
selected from the list as an alternative to direct input of a specified code using a
keyboard.
Setting the image data
To set an image code in the image/library code field by selecting image data
from the list, follow the procedure described below.
(1) Specify the image/library code field where the code is set.
(2) Click on
(3) Specify the image data from the list.
(4) Click on
Setting the library data
To set a library code in the image/library code field by selecting library data from
the list, follow the procedure described below.
[Insert Image]
button
The code of the specified image data is displayed in the image/library code
field.
or
.
.
.
[OK] button
Section
7-4