NT600SST211BEV3 Omron, NT600SST211BEV3 Datasheet - Page 501

• Manufacturer Part Number: NT600SST211BEV3
• Description: Controllers, Display
• Manufacturer: Omron

Specifications of NT600SST211BEV3

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant, Lead free / RoHS Compliant

Equipment necessary for using the NT Transfer Utility
Hardware
Operating System
Device necessary for transmitting screen data
Installing the NT Transfer Utility
Reference: S NT Transfer Utility is a software that is exclusively used for downloading/
With the Support Tool on CD-ROM, the NT Transfer Utility, which can transmit
screen data to a PT easily on site, is supplied.
It can download the screen data file in mmi format to a PT and can save the
screen data uploaded from a PT to a file in mmi format.
Screen data file in mmi format is less than 1.44 Mbytes. So it is useful when you
save the file in a floppy disk to transfer the data to and from a PT on site.
S NT Transfer Utility can handle only the file in mmi format. It is not possible to
S NT Transfer utility downloads/uploads the screen data in the application unit. It
The following indicates the equipment necessary for using the Support Tool.
S Recommended CPU
S Personal Computer
S Recommended Memory
S Free Area in Hard Disk
Microsoft Windows 95/98 and Windows NT (Windows NT is only available with
NT-series Support Tool Ver.3.3 onward.)
S RS-232C cable
Install the NT Transfer Utility in the personal computer that is to be connected to a
PT on site. NT Transfer utility operates alone. You do not need to pre-install the
Support Tool in the personal computer.
uploading the screen data without modifying the contents.
read or write the file in onw format, which is a standard format of the Support
Tool. Therefore, please be sure to save the screen data in mmi format when
you use the NT Transfer Utility. For details of the restriction of the file types and
mmi format, refer to 3-3-3 Saving the Screen Data (Application) File.
is not possible to perform individual transmission such as the transmission in
the screen unit.
Pentium 100 MHz or faster CPU
Use an IBM personal computer or 100% compatible.
32 Mbytes minimum
At least 3.5 Mbytes
The cable used for the Support Tool can be used.
For cable specifications, refer to Appendix J Connecting Cable Specifications.
NT Transfer Utility
Appendix C
489