NT600SST211BEV3 Omron, NT600SST211BEV3 Datasheet - Page 497

• Manufacturer Part Number: NT600SST211BEV3
• Description: Controllers, Display
• Manufacturer: Omron

Specifications of NT600SST211BEV3

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant, Lead free / RoHS Compliant

Applicable PT Models
Starting and Exiting the System Installer
Reference: Version up of NT31, NT31C, NT631, NT631C with “-V1” (system program Ver.
Reference: S The Support Tool is provided with the system programs of the following PT
Note
System Installer Operation
The Support Tool is provided with a system installer, which installs the system
program at a PT.
Version up of the PT system program or installation of new communication pro-
grams in a PT are possible by installing the system program.
2.1)” or below is possible by installing the system program that is supplied with
the Support Tool (Ver. 4.1).
For details of the conversion method, refer to Appendix A Data Conversion.
In this case, however, the following function can not be used.
S 32-dot high-definition font (Refer to Settings for text display in 6-1-10 Setting
S Font type ISO8859-1 (Refer to Font Type in 3-3 and Appendix K.)
S Memory unit system transmission (Refer to operation manual of NT31,
To reuse the existing NT31, NT31C, NT631, NT631C screen data, the screen
data should be converted to the data for system program Ver.3.1 beforehand.
The system installer is used to install the system program in the following PT mod-
els.
For the individual PC (PLC) models, always install the system program of the
specific PT model. It is not permissible to install the system program of another
PT model.
The system installer is started by pressing the Windows start button, then
selecting [Programs]
shown below.
Properties.)
NT31C, NT631, NT631C with “-V2”.)
NT11S/NT11, NT21, NT30, NT30C, NT31, NT31C, NT620S, NT620C/
NT625C, NT631, NT631C
models.
The system program must be installed with the system installer when installing
the Support Tool at your personal computer. For details of installation at the
personal computer, refer to Section 2 Setting Up the Support Tool.
These system programs can be transmitted to a PT using the system installer
supplied with the Support Tool (Ver.4.1).
NT31, NT31C, NT631, NT631C with “-V2” (system program Ver.3.1),
NT11S/NT11, NT21, NT30, NT30C, NT620S, NT620C/NT625C
Appendix B
[Omron]
[Ntst4.1]
[NT-series System Installer] as
485