C8051F124TB Silicon Laboratories Inc, C8051F124TB Datasheet - Page 335

• Manufacturer Part Number: C8051F124TB
• Description: MCU, MPU & DSP Development Tools With C8051F124 MCU
• Manufacturer: Silicon Laboratories Inc

Specifications of C8051F124TB

• Processor To Be Evaluated: C8051F12x and C8051F13x
• Interface Type: USB
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

24.3. Register Descriptions for PCA0
Following are detailed descriptions of the special function registers related to the operation of PCA0.
Bit7:
Bit6:
Bit5:
Bit4:
Bit3:
Bit2:
Bit1:
Bit0:
R/W
CF
Bit7
CF: PCA Counter/Timer Overflow Flag.
Set by hardware when the PCA0 Counter/Timer overflows from 0xFFFF to 0x0000. When
the Counter/Timer Overflow (CF) interrupt is enabled, setting this bit causes the CPU to vec-
tor to the CF interrupt service routine. This bit is not automatically cleared by hardware and
must be cleared by software.
CR: PCA0 Counter/Timer Run Control.
This bit enables/disables the PCA0 Counter/Timer.
0: PCA0 Counter/Timer disabled.
1: PCA0 Counter/Timer enabled.
CCF5: PCA0 Module 5 Capture/Compare Flag.
This bit is set by hardware when a match or capture occurs. When the CCF interrupt is
enabled, setting this bit causes the CPU to vector to the CCF interrupt service routine. This
bit is not automatically cleared by hardware and must be cleared by software.
CCF4: PCA0 Module 4 Capture/Compare Flag.
This bit is set by hardware when a match or capture occurs. When the CCF interrupt is
enabled, setting this bit causes the CPU to vector to the CCF interrupt service routine. This
bit is not automatically cleared by hardware and must be cleared by software.
CCF3: PCA0 Module 3 Capture/Compare Flag.
This bit is set by hardware when a match or capture occurs. When the CCF interrupt is
enabled, setting this bit causes the CPU to vector to the CCF interrupt service routine. This
bit is not automatically cleared by hardware and must be cleared by software.
CCF2: PCA0 Module 2 Capture/Compare Flag.
This bit is set by hardware when a match or capture occurs. When the CCF interrupt is
enabled, setting this bit causes the CPU to vector to the CCF interrupt service routine. This
bit is not automatically cleared by hardware and must be cleared by software.
CCF1: PCA0 Module 1 Capture/Compare Flag.
This bit is set by hardware when a match or capture occurs. When the CCF interrupt is
enabled, setting this bit causes the CPU to vector to the CCF interrupt service routine. This
bit is not automatically cleared by hardware and must be cleared by software.
CCF0: PCA0 Module 0 Capture/Compare Flag.
This bit is set by hardware when a match or capture occurs. When the CCF interrupt is
enabled, setting this bit causes the CPU to vector to the CCF interrupt service routine. This
bit is not automatically cleared by hardware and must be cleared by software.
R/W
CR
Bit6
SFR Definition 24.1. PCA0CN: PCA Control
CCF5
R/W
Bit5
CCF4
R/W
Bit4
Rev. 1.4
CCF3
R/W
Bit3
C8051F120/1/2/3/4/5/6/7
CCF2
R/W
Bit2
C8051F130/1/2/3
CCF1
R/W
Bit1
SFR Address:
SFR Page:
CCF0
R/W
Bit0
0xD8
0
00000000
Reset Value
335