ADUC7061BCPZ32 Analog Devices Inc, ADUC7061BCPZ32 Datasheet - Page 78

• Manufacturer Part Number: ADUC7061BCPZ32
• Description: DUAL 24-BIT AFE AND ARM 7 I.C
• Manufacturer: Analog Devices Inc
• Series: MicroConverter® ADuC7xxxr

Specifications of ADUC7061BCPZ32

• Design Resources: USB Based Temperature Monitor Using ADuC7061 and an External RTD (CN0075) 4 mA-to-20 mA Loop-Powered Temperature Monitor Using ADuC7060/1 (CN0145)
• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 10MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: POR, PWM, Temp Sensor, WDT
• Number Of I /o: 8
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 2.375 V ~ 2.625 V
• Data Converters: A/D 5x24b, 8x24b, D/A 1x14b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 32-LFCSP
• Package: 32LFCSP EP
• Device Core: ARM7TDMI
• Family Name: ADuC7xxx
• Maximum Speed: 10.24 MHz
• Operating Supply Voltage: 2.5 V
• Data Bus Width: 16|32 Bit
• Number Of Programmable I/os: 14
• Interface Type: I2C/SPI/UART
• On-chip Adc: 2(4-chx24-bit)
• Number Of Timers: 4
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

ADuC7060/ADuC7061
PWM2COM0 Compare Register
Name:
Address:
Default value:
Access:
Function:
PWM2COM1 Compare Register
Name:
Address:
Default value:
Access:
Function:
PWM2COM2 Compare Register
Name:
Address:
Default value:
Access:
Function:
PWM2COM0
0xFFFF0FA4
0x0000
Read and write
PWM4 output pin goes high when the PWM
timer reaches the count value stored in this
register.
PWM2COM1
0xFFFF0FA8
0x0000
Read and write
PWM4 output pin goes low when the PWM
timer reaches the count value stored in this
register.
PWM2COM2
0xFFFF0FAC
0x0000
Read and write
PWM5 output pin goes low when the PWM
timer reaches the count value stored in this
register.
Rev. B | Page 78 of 108
PWM2LEN Register
Name:
Address:
Default value:
Access:
Function:
PWMCLRI Register
Name:
Address:
Default value:
Access:
Function:
PWM2LEN
0xFFFF0FB0
0x0000
Read and write
PWM5 output pin goes high when the PWM
timer reaches the value stored in this register.
PWMCLRI
0xFFFF0FB8
0x0000
Write only
PWM interrupt source. This register must be
written to before exiting a PWM interrupt
service routine; otherwise, multiple interrupts
occur.
Write any value to this register to clear a