ISPGDX160A-5Q208 Lattice, ISPGDX160A-5Q208 Datasheet - Page 7

• Manufacturer Part Number: ISPGDX160A-5Q208
• Description: Analog & Digital Crosspoint ICs PROGRAMMABLE GEN DIG CROSSPOINT
• Manufacturer: Lattice

Specifications of ISPGDX160A-5Q208

• Mounting Style: Through Hole
• Number Of Arrays: 1
• Operating Supply Voltage: 5 V
• Supply Type: Single
• Configuration: 160 x 160
• Package / Case: DIP-24
• Input Level: TTL
• Output Level: TTL
• Supply Voltage (max): 5.25 V
• Supply Voltage (min): 4.75 V
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: 0 C
• Product: Digital Crosspoint
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

The ispGDXV/VA Family architecture has been devel-
oped to deliver an in-system programmable signal routing
solution with high speed and high flexibility. The devices
are targeted for three similar but distinct classes of end-
system applications:
Programmable, Random Signal
Interconnect (PRSI)
This class includes PCB-level programmable signal rout-
ing and may be used to provide arbitrary signal swapping
between chips. It opens up the possibilities of program-
mable system hardware. It is characterized by the need
to provide a large number of 1:1 pin connections which
are statically configured, i.e., the pin-to-pin paths do not
need to change dynamically in response to control in-
puts.
Programmable Data Path (PDP)
This application area includes system data path trans-
ceiver, MUX and latch functions. With today’s 32- and
64-bit microprocessor buses, but standard data path glue
components still relegated primarily to eight bits, PCBs
are frequently crammed with a dozen or more data path
glue chips that use valuable real estate. Many of these
applications consist of “on-board” bus and memory inter-
faces that do not require the very high drive of standard
glue functions but can benefit from higher integration.
Therefore, there is a need for a flexible means to inte-
grate these on-board data path functions in an analogous
way to programmable logic’s solution to control logic
integration. Lattice’s CPLDs make an ideal control logic
complement to the ispGDXV/VA in-system program-
mable data path devices as shown below.
Figure 4. ispGDXV/VA Complements Lattice CPLDs
Applications
(from P)
Clock(s)
System
Address
Inputs
State Machines
ispMACH
Decoders
ispLSI/
Device
(from P)
Control
Inputs
Outputs
Control
Buffers / Registers
Buffers / Registers
ispGDXV/VA
Data Path
Data Path
Device
Bus #2
Bus #1
ISP/JTAG
Interface
Configuration
(Switch)
Outputs
Specifications ispGDX160V/VA
6
Programmable Switch Replacement (PSR)
Includes solid-state replacement and integration of me-
chanical DIP Switch and jumper functions. Through
in-system programming, pins of the ispGDXV/VA de-
vices can be driven to HIGH or LOW logic levels to
emulate the traditional device outputs. PSR functions do
not require any input pin connections.
These applications actually require somewhat different
silicon features. PRSI functions require that the device
support arbitrary signal routing on-chip between any two
pins with no routing restrictions. The routing connections
are static (determined at programming time) and each
input-to-output path operates independently. As a result,
there is little need for dynamic signal controls (OE,
clocks, etc.). Because the ispGDXV/VA device will inter-
face with control logic outputs from other components
(such as ispLSI or ispMACH™) on the board (which
frequently change late in the design process as control
logic is finalized), there must be no restrictions on pin-to-
pin signal routing for this type of application.
PDP functions, on the other hand, require the ability to
dynamically switch signal routing (MUXing) as well as
latch and tri-state output signals. As a result, the pro-
grammable interconnect is used to define possible signal
routes that are then selected dynamically by control
signals from an external MPU or control logic. These
functions are usually formulated early in the conceptual
design of a product. The data path requirements are
driven by the microprocessor, bus and memory architec-
ture defined for the system. This part of the design is the
earliest portion of the system design frozen, and will not
usually change late in the design because the result
would be total system and PCB redesign. As a result, the
ability to accommodate arbitrary any pin-to-any pin re-
routing is not a strong requirement as long as the designer
has the ability to define his functions with a reasonable
degree of freedom initially.
As a result, the ispGDXV/VA architecture has been
defined to support PSR and PRSI applications (including
bidirectional paths) with no restrictions, while PDP appli-
cations (using dynamic MUXing) are supported with a
minimal number of restrictions as described below. In this
way, speed and cost can be optimized and the devices
can still support the system designer’s needs.
The following diagrams illustrate several ispGDXV/VA
applications.