IPP80N03S4L-03 Infineon Technologies, IPP80N03S4L-03 Datasheet - Page 8

• Manufacturer Part Number: IPP80N03S4L-03
• Description: MOSFET N-CH 30V 80A TO220-3
• Manufacturer: Infineon Technologies
• Series: OptiMOS™r

Specifications of IPP80N03S4L-03

• Fet Type: MOSFET N-Channel, Metal Oxide
• Fet Feature: Logic Level Gate
• Rds On (max) @ Id, Vgs: 2.7 mOhm @ 80A, 10V
• Drain To Source Voltage (vdss): 30V
• Current - Continuous Drain (id) @ 25° C: 80A
• Vgs(th) (max) @ Id: 2.2V @ 90µA
• Gate Charge (qg) @ Vgs: 140nC @ 10V
• Input Capacitance (ciss) @ Vds: 9750pF @ 25V
• Power - Max: 136W
• Mounting Type: Through Hole
• Package / Case: TO-220-3 (Straight Leads)
• Configuration: Single
• Transistor Polarity: N-Channel
• Resistance Drain-source Rds (on): 2.7 m Ohms
• Drain-source Breakdown Voltage: 30 V
• Gate-source Breakdown Voltage: +/- 16 V
• Continuous Drain Current: 80 A
• Power Dissipation: 136 W
• Maximum Operating Temperature: + 175 C
• Mounting Style: Through Hole
• Fall Time: 13 ns
• Minimum Operating Temperature: - 55 C
• Rise Time: 9 ns
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: SP000275328

IPB80N03S4L-02
IPI80N03S4L-03, IPP80N03S4L-03
Published by
Infineon Technologies AG
81726 Munich, Germany
Infineon Technologies AG 2007
©
All Rights Reserved.
Legal Disclaimer
The information given in this document shall in no event be regarded as a guarantee of conditions
or characteristics (“Beschaffenheitsgarantie”). With respect to any examples or hints given herein,
any typical values stated herein and/or any information regarding the application of the device,
Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including
without limitation warranties of non‑infringement of intellectual property rights of any third party.
Information
For further information on technology, delivery terms and conditions and prices please
contact your nearest Infineon Technologies Office (www.infineon.com).
Warnings
Due to technical requirements components may contain dangerous substances. For information
on the types in question please contact your nearest Infineon Technologies Office.
Infineon Technologies Components may only be used in life-support devices or systems with the
express written approval of Infineon Technologies, if a failure of such components can reasonably
be expected to cause the failure of that life-support device or system, or to affect the safety or
effectiveness of that device or system. Life support devices or systems are intended to be
implanted in the human body, or to support and/or maintain and sustain and/or protect human life.
If they fail, it is reasonable to assume that the health of the user or other persons may be
endangered.
Rev. 2.0
page 8
2007-03-09