SPW47N60C3 Infineon Technologies, SPW47N60C3 Datasheet - Page 13

• Manufacturer Part Number: SPW47N60C3
• Description: MOSFET N-CH 650V 47A TO-247
• Manufacturer: Infineon Technologies
• Series: CoolMOS™r

Specifications of SPW47N60C3

• Package / Case: TO-247-3 (Straight Leads)
• Fet Type: MOSFET N-Channel, Metal Oxide
• Fet Feature: Standard
• Rds On (max) @ Id, Vgs: 70 mOhm @ 30A, 10V
• Drain To Source Voltage (vdss): 650V
• Current - Continuous Drain (id) @ 25° C: 47A
• Vgs(th) (max) @ Id: 3.9V @ 2.7mA
• Gate Charge (qg) @ Vgs: 320nC @ 10V
• Input Capacitance (ciss) @ Vds: 6800pF @ 25V
• Power - Max: 415W
• Mounting Type: Through Hole
• Minimum Operating Temperature: - 55 C
• Configuration: Single
• Transistor Polarity: N-Channel
• Resistance Drain-source Rds (on): 0.07 Ohm @ 10 V
• Drain-source Breakdown Voltage: 650 V
• Gate-source Breakdown Voltage: +/- 20 V
• Continuous Drain Current: 47 A
• Power Dissipation: 415000 mW
• Maximum Operating Temperature: + 150 C
• Mounting Style: Through Hole
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: SP000013953; SPW47N60C3IN; SPW47N60C3X; SPW47N60C3XK; SPW47N60C3XTIN; SPW47N60C3XTIN

Published by
Infineon Technologies AG
81726 Munich, Germany
© 2008 Infineon Technologies AG
All Rights Reserved.
Legal Disclaimer
The information given in this document shall in no event be regarded as a guarantee of
conditions or characteristics. With respect to any examples or hints given herein, any
typical values stated herein and/or any information regarding the application of the device,
Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind,
including without limitation, warranties of non-infringement of intellectual property
rights of any third party.
Information
For further information on technology, delivery terms and conditions and prices, please
contact the nearest Infineon Technologies Office (www.infineon.com).
Warnings
Due to technical requirements, components may contain dangerous substances. For
information on the types in question, please contact the nearest Infineon Technologies
Office. Infineon Technologies components may be used in life-support devices or
systems only with the express written approval of Infineon Technologies, if a failure of
such components can reasonably be expected to cause the failure of that life-support
device or system or to affect the safety or effectiveness of that device or system. Life
support devices or systems are intended to be implanted in the human body or to support
and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to
assume that the health of the user or other persons may be endangered.
8 02 11
3
Rev. 2.6
P
Please note the new package dimensions arccording to PCN 2009-134-A