MT41J64M16LA-187E:B Micron Technology Inc, MT41J64M16LA-187E:B Datasheet - Page 185

• Manufacturer Part Number: MT41J64M16LA-187E:B
• Manufacturer: Micron Technology Inc
• Type: DDR3 SDRAMr

Specifications of MT41J64M16LA-187E:B

• Organization: 64Mx16
• Density: 1Gb
• Address Bus: 16b
• Maximum Clock Rate: 1.066GHz
• Operating Supply Voltage (typ): 1.5V
• Package Type: FBGA
• Operating Temp Range: 0C to 95C
• Operating Supply Voltage (max): 1.575V
• Operating Supply Voltage (min): 1.425V
• Supply Current: 265mA
• Pin Count: 96
• Mounting: Surface Mount
• Operating Temperature Classification: Commercial
• Lead Free Status / RoHS Status: Compliant

RESET Operation
PDF: 09005aef826aa906
1Gb_DDR3_SDRAM.pdf – Rev. J 05/10 EN
The RESET signal (RESET#) is an asynchronous signal that triggers any time it drops
LOW, and there are no restrictions about when it can go LOW. After RESET# goes LOW,
it must remain LOW for 100ns. During this time, the outputs are disabled, ODT (R
turns off (High-Z), and the DRAM resets itself. CKE should be brought LOW prior to RE-
SET# being driven HIGH. After RESET# goes HIGH, the DRAM must be reinitialized as
though a normal power-up was executed. All refresh counters on the DRAM are reset,
and data stored in the DRAM is assumed unknown after RESET# has gone LOW.
185
Micron Technology, Inc. reserves the right to change products or specifications without notice.
1Gb: x4, x8, x16 DDR3 SDRAM
© 2006 Micron Technology, Inc. All rights reserved.
RESET Operation
TT
)