ML610Q422-NNNTBZ03A7 Rohm Semiconductor, ML610Q422-NNNTBZ03A7 Datasheet - Page 93

• Manufacturer Part Number: ML610Q422-NNNTBZ03A7
• Description: MCU 8BIT 32K FLASH 22CH 120-TQFP
• Manufacturer: Rohm Semiconductor
• Series: -r

Specifications of ML610Q422-NNNTBZ03A7

• Core Processor: nX-U8/100
• Core Size: 8-Bit
• Speed: 4.2MHz
• Connectivity: I²C, SSP, UART/USART
• Peripherals: LCD, Melody Driver, POR, PWM, WDT
• Number Of I /o: 14
• Program Memory Size: 32KB (16K x 16)
• Program Memory Type: FLASH
• Eeprom Size: -
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 1.1 V ~ 3.6 V
• Data Converters: A/D 2x12b, 2x24b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 70°C
• Package / Case: 100-TFQFP
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Reset of voltage regulator
for low-speed oscillation
6.3.1.2
The low-speed clock generation circuit is activated by the occurrence of power ON reset.
A low-speed clock (LSCLK) is supplied to the peripheral circuits after the elapse of the low-speed oscillation start
period (T
The low-speed clock generation circuit stops the oscillation in STOP mode. When oscillation is resumed by releasing of
the STOP mode by external interrupt, LSCLK is supplied to the peripheral circuits after the elapse of the low-speed
oscillation start period (T
Chapter 4, “MCU Control Function”.
Figure 6-3 shows the waveforms of the low-speed clock generation circuit. For the low-speed oscillation start time
(T
Note:
After the power supply is turned on, CPU starts operation with a high-speed clock (500 kHz RC oscillation). It is
recommended to switch to the low-speed clock after confirming that the low-speed clock is oscillating by checking that
the 128 Hz interrupt request bit (Q128H) of the low-speed time base counter is “1”. If the clock is switched before the
low-speed clock oscillates, the CPU stops operation until oscillation of the low-speed clock starts.
XT L
oscillation waveform
), see Appendix C, “Electrical Characteristics”.
Power supply V
Low-speed clock
Low-speed clock
XTL
RESET_VRX
) and oscillation stabilization period (8192 counts) after powered on.
Operation of Low-Speed Clock Generation Circuit
RESET
LSCLK
DD
Figure 6-3 Operation of Low-Speed Clock Generation Circuit
XTL
) and low-speed clock (LSCLK) oscillation stabilization period. For STOP mode, see
T
X TL
: Oscillation start time
Low-speed oscillation
Count: 8192
Low-speed oscillation
Count: 4096
Low-speed clock oscillation waveform
Start of LSCLK
supply
6 – 7
LSCLK waveform
STOP
mode
external interrupt
Occurrence of
ML610Q421/ML610Q422 User’s Manual
T
X TL
Chapter 6 Clock Generation Circuit
: Oscillation start time
Low-speed oscillation
Count: 8192
Low-speed oscillation
Count: 4096
Low-speed clock oscillation waveform
Start of LSCLK
supply
LSCLK waveform