750-841 WAGO, 750-841 Datasheet - Page 250

• Manufacturer Part Number: 750-841
• Description: CONTR.ETHERNET TCP/IP 10/100MBIT
• Manufacturer: WAGO

Specifications of 750-841

• Rohs Compliant: YES
• No. Of Digital Inputs: 10
• No. Of Digital Outputs: 10

242 •
I/O Modules
Process Data Architecture for EtherNet/IP
Note:
With the freely parametrizable variations /003 000 of the serial interface
modules, the desired operation mode can be set. Dependent on it, the
process image of these modules is then the same, as from the appropriate
variation.
Serial Interface Modules with alternative Data Format
750-650, (and the variations /000-002, -004, -006, -009, -010, -011, -012,
750-651, (and the variations /000-002, -003)
750-653, (and the variations /000-002, -007)
The above Serial Interface Modules with alternative data format have a total
of 4 bytes of user data in both the Input and Output Process Image (3 bytes of
serial data and 1 byte of control/status). The following table illustrates the
Input and Output Process Image, which have a total of 2 words mapped into
each image. Word alignment is applied.
The specialty modules represent 2x2 bytes input and output data and seize 2
Instances in Class (0x67) and 2 Instances in Class (0x68).
Serial Interface Modules with Standard Data Format
750-650/000-001, -014, -015, -016
750-651/000-001
750-653/000-001, -006
The above Serial Interface Modules with Standard Data Format have a total of
6 bytes of user data in both the Input and Output Process Image (5 bytes of
serial data and 1 byte of control/status). The following table illustrates the
Input and Output Process Image, which have a total of 3 words mapped into
each image. Word alignment is applied.
Offset
0
1
-013)
High Byte
D0
D2
Byte Destination
Input and Output Process Image
Low Byte
C/S
D1
Data byte
Data bytes
Remark
WAGO-I/O-SYSTEM 750
Control/Status byte
ETHERNET TCP/IP