750-841 WAGO, 750-841 Datasheet - Page 35

• Manufacturer Part Number: 750-841
• Description: CONTR.ETHERNET TCP/IP 10/100MBIT
• Manufacturer: WAGO

Specifications of 750-841

• Rohs Compliant: YES
• No. Of Digital Inputs: 10
• No. Of Digital Outputs: 10

WAGO-I/O-SYSTEM 750
ETHERNET TCP/IP
The maximum input current of the 24 V system supply is 500 mA. The exact
electrical consumption (I
Recommendation
With the WAGO ProServe® Software smartDESIGNER, the assembly of a
fieldbus node can be configured. The configuration can be tested via the
integrated accuracy check.
Note
If the electrical consumption of the power supply point for the 24 V-system
supply exceeds 500 mA, then the cause may be an improperly aligned node
or a defect.
During the test, all outputs, in particular those of the relay modules, must be
active.
Coupler/Controller
I(5 V)
750-613
I(5 V)
Input current I(24 V) =
total
total
=
=
Sum of all the internal current consumption of the connected
bus modules
+ internal current consumption coupler/controller
Sum of all the internal current consumption of the connected
bus modules
5 V / 24 V * I(5 V)
η = 0.87 (at nominal load)
(24 V)
) can be determined with the following formulas:
total
The WAGO-I/O-SYSTEM 750
/ η
Power Supply
• 27