ZT5515A-1BW Intel, ZT5515A-1BW Datasheet - Page 40

• Manufacturer Part Number: ZT5515A-1BW
• Manufacturer: Intel

Specifications of ZT5515A-1BW

• Lead Free Status / Rohs Status: Supplier Unconfirmed

IDE Controller
7.3
7.4
7.5
40
IDE I/O Mapping
The I/O map for the IDE interface varies depending on the mode of operation. The default mode is
“compatibility mode,” meaning that the interface uses the PC-AT legacy addresses of 1F0h-1F7h,
with 3F6h and interrupt IRQ14 for the primary channel. The secondary channel uses I/O addresses
170h-177h, 376h and interrupt IRQ15. No memory addresses are used.
IDE CompactFlash Carrier
Intel provides an optional IDE CompactFlash* Carrier (ZT 96080) that can be mounted in the hard
drive location on the ZT 5515A-1B (the ZT 5515A-1A does not support this CompactFlash*
carrier on the main board because it does not have an IDE connector). This carrier accommodates
multiple types of CompactFlash* cards, which appear to the system as a hard drive, and are
automatically supported by most operating systems. For more information about the ZT 96080
CompactFlash Carrier, see the Intel NetStructure building blocks page at:
http://developer.intel.com/design/network/products/cbp/linecard.htm
IDE Device Drivers
The IDE interface works with all applications by default. To fully utilize the IDE interface,
additional software drivers need to be installed. Contact the vendor of your intended operating
system to receive the latest drivers
Intel
®
NetStructure
TM
ZT 5515 Compute Processor Board Technical Product Specification