ISP452XT Infineon Technologies, ISP452XT Datasheet - Page 10
![](/photos/31/36/313648/406-sot-223_sml.jpg)
ISP452XT
Manufacturer Part Number
ISP452XT
Description
Manufacturer
Infineon Technologies
Datasheet
1.ISP452XT.pdf
(10 pages)
Specifications of ISP452XT
Switch Type
High Side
Power Switch Family
ISP 452
Input Voltage
-3 to 40V
Power Switch On Resistance
160mOhm
Output Current
700mA
Number Of Outputs
Single
Mounting
Surface Mount
Supply Current
1mA
Package Type
SOT-223
Operating Temperature (min)
-30C
Operating Temperature (max)
85C
Operating Temperature Classification
Commercial
Pin Count
3 +Tab
Power Dissipation
1.8W
Lead Free Status / Rohs Status
Compliant
ISP 452
Package:
all dimensions in mm.
PG-SOT 223:
Published by
Infineon Technologies AG,
St.-Martin-Strasse 53,
D-81541 München, Germany
© Infineon Technologies AG 2001
All Rights Reserved.
Attention please!
The information herein is given to describe certain components and shall not be considered as a guarantee
of characteristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement,
regarding circuits, descriptions and charts stated herein.
Infineon Technologies is an approved CECC manufacturer.
Information
For further information on technology, delivery terms and conditions and prices please contact your
nearest Infineon Technologies Office in Germany or our Infineon Technologies Representatives worldwide
(see address list).
Warnings
Due to technical requirements components may contain dangerous substances. For information on the
types in question please contact your nearest Infineon Technologies Office.
Infineon Technologies Components may only be used in life-support devices or systems with the express
written approval of Infineon Technologies, if a failure of such components can reasonably be expected to
cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device
or system. Life support devices or systems are intended to be implanted in the human body, or to support
and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health
of the user or other persons may be endangered.
Page 10
2006-03-01