MPCBL5524A1D Intel, MPCBL5524A1D Datasheet - Page 29

• Manufacturer Part Number: MPCBL5524A1D
• Manufacturer: Intel

Specifications of MPCBL5524A1D

• Lead Free Status / Rohs Status: Supplier Unconfirmed

3.2.2
3.3
3.4
Intel NetStructure
Warning:
Electrical and Environmental Requirements
The ZT 5524 / MPCBL5524 requires a maximum of +5 VDC +5%, -3% @ 4.5 A with dual
933 MHz processors loaded, +5 VDC +5%, -3% @ 2.7 A with a single 933 MHz processor loaded,
+3.3 VDC +5%, -3% @ 7 A, and +12 VDC ± 5%, -3% @ 50 mA. Electrical specifications are
covered in more detail in
The ZT 5524 / MPCBL5524 is supplied with a heatsink allowing the processor to operate between
0° and approximately 45 °C ambient with a minimum of 250 LFM (1.27 meters per second) of
external airflow. It is the users' responsibility to ensure that the ZT 5524 / MPCBL5524 is installed
in a chassis capable of supplying adequate airflow. The maximum power dissipation of the
processor is 13.2 W. External airflow must be provided at all times. See
“Specifications,”
Operating the ZT 5524 / MPCBL5524 without adequate airflow will damage the processor.
The ZT 5524 / MPCBL5524 may contain materials that require regulation upon disposal. Please
dispose of this product in accordance with local rules and regulations. For disposal or recycling
information, please contact your local authorities or the Electronic Industries Alliance at
http://www.eiae.org/.
Memory Configuration
The ZT 5524 / MPCBL5524 addresses up to 4 GBytes of memory. The address space is divided
between memory local to the board and memory located on the CompactPCI bus. Any memory not
reserved or occupied by a local memory device (DRAM/flash) is available to the CompactPCI bus.
The DIMM socket of the ZT 5524 / MPCBL5524 can be populated with one registered, 168-pin
ECC SDRAM. The socket supports 256, 512, or 1024 MByte memory modules, giving a memory
size range from 256 MByte to a maximum of 1 GByte (single DIMM socket) or 4 GBytes (four
DIMM sockets) of 133 MHz SDRAM memory. Refer to the ZT 5524 / MPCBL5524 Compatibility
Report, available on the Intel website, for a complete list of compatible memory types. A link to
this website is available in
Figure 3, “Memory Address Map Example” on page 30
ZT 5524 / MPCBL5524.
I/O Configuration
The ZT 5524 / MPCBL5524 addresses up to 64 KByte of I/O using a 16-bit I/O address. The
address space is divided between I/O local to the board and I/O on the CompactPCI bus. Any I/O
space not occupied by a local I/O device is available for the CompactPCI bus.
The ZT 5524 / MPCBL5524 is populated with many of the most commonly used I/O peripheral
devices for industrial control and computing applications. The I/O address location for each of the
peripherals is shown in
®
ZT 5524 / MPCBL5524 High-Performance System Master Processor Board TPS
and
Appendix B, “System Registers,”
Table 1, “I/O Address Map” on page
Appendix A, “Specifications.”
Appendix E, “ZT 5524 / MPCBL5524 Product Page.”
shows example memory addressing for the
for more details.
31.
Appendix A,
Getting Started
29