CY7C64713-128AXC Cypress Semiconductor Corp, CY7C64713-128AXC Datasheet - Page 54

• Manufacturer Part Number: CY7C64713-128AXC
• Description: IC MCU USB EZ FX1 16KB 128LQFP
• Manufacturer: Cypress Semiconductor Corp
• Series: EZ-USB FX1™r

Specifications of CY7C64713-128AXC

• Program Memory Type: ROMless
• Package / Case: 128-LQFP
• Applications: USB Microcontroller
• Core Processor: 8051
• Controller Series: CY7C647xx
• Ram Size: 16K x 8
• Interface: I²C, USB, USART
• Number Of I /o: 40
• Voltage - Supply: 3.15 V ~ 3.45 V
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Processor Series: CY7C64xx
• Core: M8C
• Data Bus Width: 8 bit
• Data Ram Size: 16 KB
• Interface Type: I2C/USART
• Maximum Clock Frequency: 48 MHz
• Number Of Programmable I/os: 40
• Number Of Timers: 3
• Maximum Operating Temperature: + 70 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: CY3674
• Minimum Operating Temperature: 0 C
• Cpu Family: FX2LP
• Device Core: 8051
• Device Core Size: 8b
• Frequency (max): 48MHz
• Program Memory Size: Not Required
• Total Internal Ram Size: 16KB
• # I/os (max): 40
• Number Of Timers - General Purpose: 3
• Operating Supply Voltage (typ): 3.3V
• Operating Supply Voltage (max): 3.45V
• Operating Supply Voltage (min): 3.15V
• Instruction Set Architecture: CISC
• Operating Temp Range: 0C to 70C
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Pin Count: 128
• Package Type: TQFP
• Controller Family/series: (8051) USB
• Core Size: 8 Bit
• No. Of I/o's: 40
• Ram Memory Size: 16KB
• Cpu Speed: 48MHz
• No. Of Timers: 3
• Embedded Interface Type: I2C, SPI, UART, USB
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 428-1681 - KIT USB FX1 DEVELOPMENT BOARD428-1677 - KIT DEVELOPMENT EZ-USB FX2LP428-1339 - KIT LOW SPEED PERSONALITY BOARD
• Lead Free Status / Rohs Status: Compliant
• Other names: 428-1678; CY7C64713-128AXC

Document History Page
Document #: 38-08039 Rev. *F
Document Title: CY7C64713 EZ-USB FX1™ USB Microcontroller Full Speed USB Peripheral Controller
Document Number: 38-08039
REV.
*A
*B
*C
*D
*E
*F
**
ECN NO. Issue Date
1664787
2088446
2710327
132091
230709
307474
392702
05/22/2009
SEE ECN
SEE ECN
SEE ECN
See ECN
See ECN
02/10/04
Change
Orig. of
CMCC/
JASM
JASM
KKU
KKU
BHA
BHA
DPT
New Data Sheet.
Changed Lead free Marketing part numbers in
change in 28-00054.
Changed default PID in
Updated register table.
Removed word compatible where associated with I2C.
Changed Set-up to Setup.
Added Power Dissipation.
Changed Vcc from ± 10% to ± 5%
Added values for V
Added values for I
Added values for I
Removed I
Changed PKTEND to FLAGS output propagation delay (asynchronous
interface) in Table 10-14 from a maximum value of 70 ns to 115 ns.
Removed 56 SSOP and added 56 QFN package.
Provided additional timing restrictions and requirement regarding the use of
PKTEND pin to commit a short one byte/word packet subsequent to committing
a packet automatically (when in auto mode).
Added part number CY7C64714 ideal for battery powered applications.
Changed Supply Voltage in section 8 to read +3.15V to +3.45V.
Added Min Vcc Ramp Up time (0 to 3.3v).
Removed Preliminary.
Corrected signal name for pin 54 in
Added information on the AUTOPTR1/AUTOPTR2 address timing with
regards to data memory read/write timing diagram.
Removed TBD in
Added section
Added the 56 pin SSOP pinout and package information.
Delete CY7C64714
Updated package diagrams
Added 56-Pin QFN (8 X 8 mm) package diagram
Updated ordering information for CY7C64713-56LTXC part
UNCONFIGURED
“PORTC Strobe Feature Timings”
Table 16
CC
SUSP
IH_X
, V
Table 2
IL_X
from
Description of Change
on page 37.
Table 10
on page 4.
Figure 10
on page 31.
on page 15.
Table 29
on page 35.
according to spec
CY7C64713
Page 54 of 55
[+] Feedback