CS4271-CZZ Cirrus Logic Inc, CS4271-CZZ Datasheet - Page 39

• Manufacturer Part Number: CS4271-CZZ
• Description: IC CODEC AUD 24BIT 114DB 28TSSOP
• Manufacturer: Cirrus Logic Inc
• Type: Stereo Audior

Specifications of CS4271-CZZ

• Package / Case: 28-TSSOP
• Data Interface: Serial
• Resolution (bits): 24 b
• Number Of Adcs / Dacs: 2 / 2
• Sigma Delta: Yes
• Dynamic Range, Adcs / Dacs (db) Typ: 108 / 114
• Voltage - Supply, Analog: 4.75 V ~ 5.25 V
• Voltage - Supply, Digital: 3.1 V ~ 5.25 V
• Operating Temperature: -10°C ~ 70°C
• Mounting Type: Surface Mount
• Number Of Adc Inputs: 2
• Number Of Dac Outputs: 2
• Conversion Rate: 192 KSPS
• Interface Type: Serial (I2C, I2S, SPI)
• Resolution: 24 bit
• Operating Supply Voltage: 3.3 V, 5 V
• Maximum Operating Temperature: + 70 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 10 C
• Number Of Channels: 2 ADC/2 DAC
• Thd Plus Noise: - 98 dB ADC / - 100 dB DAC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 598-1003 - EVAL BOARD CS4271 STEREO CODEC
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 598-1041-5

8.2
8.2.1
8.2.2
8.2.3
DS592F1
AMUTE
7
DAC Control - Address 02h
Function:
Function:
Function:
Auto-Mute (Bit 7)
Interpolation Filter Select (Bit 6)
De-Emphasis Control (Bits 5:4)
When set, enables the Auto-Mute function. See “Auto-Mute” on page 30.
This Function allows the user to select whether the Interpolation Filter has a fast or slow roll off. When
set, this bit selects the slow roll off filter, when cleared it selects the fast roll off filter. The - 3 dB corner
is approximately the same for both filters, but the slope of the roll off is greater for the fast roll off filter.
Implementation of the standard 50/15 µs digital de-emphasis filter response, Figure 19, requires re-
configuration of the digital filter to maintain the proper filter response for 32, 44.1 or 48 kHz sample
rates. NOTE: De-emphasis is available only in Single-Speed Mode. See Table 13 below.
FILT_SEL
6
DEM1
DEM1
-10dB
0
0
1
1
Gain
5
0dB
Table 13. De-Emphasis Mode Selection
dB
Figure 19. De-Emphasis Curve
DEM0
0
1
0
1
DEM0
3.183 kHz
T1=50 µs
4
F1
Disabled (default)
44.1 kHz de-emphasis
48 kHz de-emphasis
32 kHz de-emphasis
RMP_UP
Description
3
10.61 kHz
F2
T2 = 15 µs
Frequency
RMP_DN
2
INV_A
1
CS4271
INV_B
0
39