SAK-XC167CI-32F40FBB-A Infineon Technologies, SAK-XC167CI-32F40FBB-A Datasheet - Page 64

• Manufacturer Part Number: SAK-XC167CI-32F40FBB-A
• Description: Microcontrollers (MCU) 256KB FLASH 12KB RAM 2xASC 2xSSC I2C
• Manufacturer: Infineon Technologies

Specifications of SAK-XC167CI-32F40FBB-A

• Data Bus Width: 16 bit
• Program Memory Type: Flash
• Program Memory Size: 256 KB
• Data Ram Size: 12 KB
• Interface Type: 2xASC, 2xSSC, 1xI2C
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 103
• Number Of Timers: 11
• Operating Supply Voltage: 5 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Package / Case: PG-TQFP-144
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 16 Channel
• Lead Free Status / Rohs Status: Details
• Other names: KX167CI32F40FBBAXT

4) The total supply current in Sleep and Power down mode is the sum of the temperature dependent leakage
5) This parameter is determined mainly by the transistor leakage currents. This current heavily depends on the
6) All inputs (including pins configured as inputs) at 0 V to 0.1 V or at
7) This parameter is determined mainly by the current consumed by the oscillator switched to low gain mode (see
Data Sheet
current and the frequency dependent current for RTC and main oscillator or auxiliary oscillator (if active).
junction temperature (see
if no current flows through the port output drivers. Otherwise, the resulting temperature difference must be
taken into account.
pins configured as outputs) disconnected. This parameter is tested at 25 °C and is valid for
Figure
given values refer to a typical circuitry and may change in case of a not optimized external oscillator circuitry.
12). This current, however, is influenced by the external oscillator circuitry (crystal, capacitors). The
Figure
13). The junction temperature
62
T
J
is the same as the ambient temperature
V
DDP
- 0.1 V to
Electrical Parameters
V
DDP
, all outputs (including
XC167CI-32F
Derivatives
T
V1.1, 2006-08
J
≥ 25 °C.
T
A