XW2Z-200J-B9 Omron, XW2Z-200J-B9 Datasheet - Page 423

• Manufacturer Part Number: XW2Z-200J-B9
• Description: CONNECTOR CABLE 2M
• Manufacturer: Omron

Specifications of XW2Z-200J-B9

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: XW2Z200JB9

Data Format
Baud Rate
Send Delay
Start Code and End Code
396
System Setup, Auxiliary Area Allocations, and Built-in I/O Allocations
+160
+161
+162
+164
+165
Word
Word
Word
Word
Address
Address
Address
Address
15
03
02
00 and
01
00 to 07 00 hex: 9,600
00 to 15 Send delay time,
00 to 07 00 to FF hex
08 to 15 00 to FF hex
12
08 and
09
Bits
Bits
Bits
Bits
0: Default format
1: Custom
Default: 00 hex
0: 7-bit
1: 8-bit
Default: 0
0: 2 bits
1: 1 bit
Default: 0
00: Even
01: Odd
10: None
Default: 00 hex
01 hex: 300
02 hex: 600
03 hex: 1,200
04 hex: 2,400
05 hex: 4,800
06 hex: 9,600
07 hex: 19,200
08 hex: 38,400
09 hex: 57,600
Unit: bit/s
Default: 00 hex
0 to 99,990 ms
(0000 to 270F hex,
unit: 10 ms)
Default: 0000 hex
Default: 00 hex
Default: 00 hex
0: Don’t add start code
1: Add start code
Default: 0
00: Don’t add end code
and use number of
received bytes setting
01: Add end code
11: Add CR+LF
Default: 00
Settings
Settings
Settings
Settings
The frame format for
no-protocol commu-
nications data (mes-
sages) can be
specified.
Specifies whether
the frame format for
no-protocol commu-
nications is speci-
fied.
The standard settings are for 1 start bit,
7-bit data, even parity, 2 stop bits, and
9,600 baud.
Sets the data length.
Sets the number of stop bits.
Sets the parity.
This setting is valid when the RS-232C
port is set for the No-protocol Serial
Communications Mode. Set the Data
Format setting to 1 to enable this set-
ting.
When TXD(236) is executed, data will
be sent from the RS-232C port after the
delay time set here.
Function
Function
Function
Function
Specifies the end
code. This setting is
valid when bits 08 to
09 of +165 are set to
01.
Specifies the start
code. This setting is
valid when bit 12 of
+165 is set to 1.
Specifies whether to
add a start code.
Specifies whether to
add an end code.
A619.02 (RS-232C Port
Settings Changing Flag)
A619.02 (RS-232C Port
Settings Changing Flag)
A619.02 (RS-232C Port
Settings Changing Flag)
A619.02 (RS-232C Port
Settings Changing Flag)
Related flags and
Related flags and
Related flags and
Related flags and
words
words
words
words
At next cycle (Also
can be changed
with STUP (237).)
At next cycle (Also
can be changed
with STUP (237).)
At next cycle (Also
can be changed
with STUP (237).)
At next cycle (Also
can be changed
with STUP (237).)
Appendix C
When setting is
When setting is
When setting is
When setting is
read
read
read
read