MT29F4G08ABBDAH4:D Micron Technology Inc, MT29F4G08ABBDAH4:D Datasheet - Page 86

• Manufacturer Part Number: MT29F4G08ABBDAH4:D
• Description: MICMT29F4G08ABBDAH4:D 4G SLC NAND FLASH
• Manufacturer: Micron Technology Inc

LOCK (2Ah)
Figure 60: LOCK Operation
PDF: 09005aef83b25735
m60a_4gb_nand.pdf – Rev. J 9/11 EN
By default at power-on, if LOCK is HIGH, all the blocks are locked and protected from
PROGRAM and ERASE operations. If portions of the device are unlocked using the UN-
LOCK (23h) command, they can be locked again using the LOCK (2Ah) command. The
LOCK command locks all of the blocks in the device. Locked blocks are write-protected
from PROGRAM and ERASE operations.
To lock all of the blocks in the device, issue the LOCK (2Ah) command.
When a PROGRAM or ERASE operation is issued to a locked block, R/B# goes LOW for
t
mand reports bit 7 as 0, indicating that the block is protected.
The LOCK (2Ah) command is disabled if LOCK is LOW at power-on or if the device is
locked tight.
WE#
LBSY. The PROGRAM or ERASE operation does not complete. Any READ STATUS com-
I/Ox
CE#
CLE
LOCK command
2Ah
4Gb, 8Gb, 16Gb: x8, x16 NAND Flash Memory
86
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2009 Micron Technology, Inc. All rights reserved.
Block Lock Feature