TMPM380FWFG Toshiba, TMPM380FWFG Datasheet - Page 91

• Manufacturer Part Number: TMPM380FWFG
• Manufacturer: Toshiba

Specifications of TMPM380FWFG

• Product Summaries: Summary
• Lead Free: Yes
• Rohs Compatible Product(s): Available
• Rom (kbytes): 128K
• Rom Type: Flash
• Ram (kbytes): 12K
• Number Of Pins: 100
• Package: LQFP(14×14)
• Vcc: 5V
• Cpu Mhz: 40
• Ssp (ch) Spi: 2
• I2c/sio (ch): 2
• Uart/sio (ch): 5
• Usb: -
• Can: -
• Ethernet: -
• External Bus Interface: N
• Cs/wait Controller (ch): -
• Dma Controller: 2
• 10-bit Da Converter: -
• 10-bit Ad Converter: -
• 12-bit Ad Converter: 18
• 16-bit Timer / Counter: 8
• Motor / Igbt Control: Y
• Real Time Clock: 1
• Watchdog Timer: Y
• Osc Freq Detect: Y
• Clock Gear: Y
• Low-power Hold Function: -
• Remote Control Interface: Y
• Hardware Cec Controller: -
• Comparators: -
• Low-voltage Detector: Y
• Etm Hardware Trace: 2-bit

7 Exceptions
TMPM380/M382
<bit31:0>
<SETPEND>
Use these bits to force interrupts into the pending state or determine which
interrupts are currently pending.
Writing “1” to a bit in this register pends the corresponding interrupt. However,
writing “1” has no effect on an interrupt that is already pending or is disabled.
Writing “0” has no effect.
Reading a bit in this register returns the current state of the corresponding interrupt
as shown below.
0 = Not pending
1 = Pending
Each bit in this register can be cleared by writing “1” to the corresponding bit in the
Interrupt Clear-Pending Register.
List of
(Note) For descriptions of interrupts and interrupt numbers, see Section 7.5.1.4
Interrupt Factors.
TMPM380/M382 - 36 / 59 -