cbtl12131 NXP Semiconductors, cbtl12131 Datasheet - Page 23

• Manufacturer Part Number: cbtl12131
• Description: Cbtl12131 Displayport Multiplexer For Bidirectional Video In All-in-one Computer Systems
• Manufacturer: NXP Semiconductors

NXP Semiconductors
CBTL12131
Product data sheet
12.4 Reflow soldering
Key characteristics in reflow soldering are:
Table 19.
Table 20.
Moisture sensitivity precautions, as indicated on the packing, must be respected at all
times.
Studies have shown that small packages reach higher temperatures during reflow
soldering, see
Package thickness (mm)
< 2.5
≥ 2.5
Package thickness (mm)
< 1.6
1.6 to 2.5
> 2.5
•
•
•
Lead-free versus SnPb soldering; note that a lead-free reflow process usually leads to
higher minimum peak temperatures (see
reducing the process window
Solder paste printing issues including smearing, release, and adjusting the process
window for a mix of large and small components on one board
Reflow temperature profile; this profile includes preheat, reflow (in which the board is
heated to the peak temperature) and cooling down. It is imperative that the peak
temperature is high enough for the solder to make reliable solder joints (a solder paste
characteristic). In addition, the peak temperature must be low enough that the
packages and/or boards are not damaged. The peak temperature of the package
depends on package thickness and volume and is classified in accordance with
Table 19
SnPb eutectic process (from J-STD-020C)
Lead-free process (from J-STD-020C)
and
Figure
All information provided in this document is subject to legal disclaimers.
20
11.
Rev. 1 — 25 February 2011
Package reflow temperature (°C)
Volume (mm
< 350
235
220
Package reflow temperature (°C)
Volume (mm
< 350
260
260
250
3
3
DisplayPort multiplexer for bidirectional video
)
)
Figure
350 to 2000
260
250
245
11) than a SnPb process, thus
≥ 350
220
220
CBTL12131
245
> 2000
260
245
© NXP B.V. 2011. All rights reserved.
23 of 28