z8fmc16100 ZiLOG Semiconductor, z8fmc16100 Datasheet - Page 235

• Manufacturer Part Number: z8fmc16100
• Description: Z8 Encore Motor Control Flash Mcus
• Manufacturer: ZiLOG Semiconductor

PS024611-0408
Bit Position
[7]
WDT_RES
[6]
WDT_AO
[5:4]
OSC_SEL
[3]
VBO_AO
[2]
RP
[1]
Reserved
[0]
FWP
Program Memory Address 0001H
These bits define the PWM behavior. The High and Low default off-state (the output
polarity) is also defined here. The off-state is used by the PWM output control and PWM
Fault logic. PWM output pairs can be disabled and used as high-impedance input pins.
The RESET/Fault0 pin function is also selectable.
Value (H) Description
00
01
10
11
0
1
0
1
0
1
0
1
0
1
Watchdog Timer Reset
Watchdog Timer timeout generates an interrupt request. Interrupts must
be globally enabled for the eZ8 CPU to acknowledge the interrupt
request.
Watchdog Timer timeout causes a Reset.
Watchdog Timer Always On
Watchdog Timer is automatically enabled.
Watchdog Timer is enabled on execution of the WDT instruction.
External Oscillator Mode Selection
Reserved.
Minimum power for use with very low frequency crystals
(32 kHz to 1.0 MHz).
Medium power for use with medium frequency crystals or ceramic
resonators (0.5 MHz to 10.0 MHz).
Maximum power for use with high frequency crystals
(8.0 MHz to 20.0 MHz).
Voltage Brownout Always On
Voltage Brownout Protection is disabled in STOP mode to reduce total
power consumption.
Voltage Brownout Protection is always enabled.
Read Protect
External access to User program code is disabled.
User program code is accessible.
Must be 1.
This Option Bit is reserved for future use and must always be 1.
Flash Write Protect
Programming, Page Erase, and Mass Erase using User Code is disabled.
Programming, Page Erase, and Mass Erase are enabled for all of Flash
Program Memory.
Z8FMC16100 Series Flash MCU
Program Memory Address 0001H
Product Specification
223