en29lv040a-45rtip Eon Silicon Solution Inc., en29lv040a-45rtip Datasheet - Page 30

• Manufacturer Part Number: en29lv040a-45rtip
• Description: 4 Megabit 512k X 8-bit Uniform Sector Cmos 3.0 Volt-only Flash Memory
• Manufacturer: Eon Silicon Solution Inc.

ABSOLUTE MAXIMUM RATINGS
RECOMMENDED OPERATING RANGES
This Data Sheet may be revised by subsequent versions
or modifications due to changes in technical specifications.
Respect to Ground
Notes:
1.
2.
3.
4.
1.
Voltage with
Recommended Operating Ranges define those limits between which the functionality of the device is guaranteed.
No more than one output shorted at a time. Duration of the short circuit should not be greater than one second.
Minimum DC input voltage on A9 and OE# pins is –0.5V. During voltage transitions, A9 and OE# pins may undershoot V
to –1.0V for periods of up to 50ns and to –2.0V for periods of up to 20ns. See figure below. Maximum DC input voltage on
A9 and OE# is 11.5V which may overshoot to 12.5V for periods up to 20ns.
Minimum DC voltage on input or I/O pins is –0.5 V. During voltage transitions, inputs may undershoot V
periods of up to 50ns and to –2.0 V for periods of up to 20ns. See figure below. Maximum DC voltage on output and I/O
pins is V
below.
Stresses above the values so mentioned above may cause permanent damage to the device. These values are for a stress
rating only and do not imply that the device should be operated at conditions up to or above these values. Exposure of the
device to the maximum rating values for extended periods of time may adversely affect the device reliability.
Output Short Circuit Current
Ambient Operating Temperature
Operating Supply Voltage
Maximum Negative Overshoot
Ambient Temperature
Storage Temperature
cc
Plastic Packages
+ 0.5 V. During voltage transitions, outputs may overshoot to V
With Power Applied
Commercial Devices
Industrial Devices
Vcc
Parameter
Parameter
Waveform
All other pins
A9 and OE#
Vcc
1
2
3
Rev. B, Issue Date: 2007/01/05
30
1
Standard Voltage Range:
+1.5V
©2003 Eon Silicon Solution, Inc., www.essi.com.tw
Vcc
Regulated Voltage
-0.5 to Vcc+0.5
Range: 3.0-3.6
-0.5 to +11.5
-65 to +125
-65 to +125
-55 to +125
-0.5 to +4.0
2.7 to 3.6
-40 to 85
0 to 70
Value
Value
200
Maximum Positive Overshoot
cc
+ 1.5 V for periods up to 20ns. See figure
Waveform
EN29LV040A
ss
Unit
Unit
mA
to –1.0V for
°C
°C
°C
°C
V
V
V
V
ss