PIC18F23K20-E/MLQTP MICROCHIP [Microchip Technology], PIC18F23K20-E/MLQTP Datasheet - Page 63

• Manufacturer Part Number: PIC18F23K20-E/MLQTP
• Description: 28/40/44-Pin Flash Microcontrollers with 10-Bit A/D and nanoWatt Technology
• Manufacturer: MICROCHIP [Microchip Technology]

TABLE 4-4:
© 2007 Microchip Technology Inc.
CM2CON1
SLRCON
SSPMSK
Legend:
Note 1:
Register
2:
3:
4:
5:
6:
u = unchanged, x = unknown, - = unimplemented bit, read as ‘0’, q = value depends on condition.
Shaded cells indicate conditions do not apply for the designated device.
One or more bits in the INTCONx or PIRx registers will be affected (to cause wake-up).
When the wake-up is due to an interrupt and the GIEL or GIEH bit is set, the PC is loaded with the interrupt vector
(0008h or 0018h).
When the wake-up is due to an interrupt and the GIEL or GIEH bit is set, the TOSU, TOSH and TOSL are updated with
the current value of the PC. The STKPTR is modified to point to the next location in the hardware stack.
See Table 4-3 for Reset value for specific condition.
Bits 6 and 7 of PORTA, LATA and TRISA are enabled, depending on the oscillator mode selected. When not enabled as
PORTA pins, they are disabled and read ‘0’.
All bits of the ANSELH register initialize to ‘0’ if the PBADEN bit of CONFIG3H is ‘0’.
INITIALIZATION CONDITIONS FOR ALL REGISTERS (CONTINUED)
PIC18F2XK20 PIC18F4XK20
PIC18F2XK20 PIC18F4XK20
PIC18F2XK20 PIC18F4XK20
Applicable Devices
Advance Information
Brown-out Reset
Power-on Reset,
0000 ----
---1 1111
1111 1111
PIC18F2XK20/4XK20
RESET Instruction,
MCLR Resets,
Stack Resets
WDT Reset,
0000 ----
---1 1111
1111 1111
Wake-up via WDT
DS41303B-page 61
or Interrupt
uuuu ----
---u uuuu
uuuu uuuu