FDC37C669_07 SMSC [SMSC Corporation], FDC37C669_07 Datasheet - Page 19

• Manufacturer Part Number: FDC37C669_07
• Description: PC 98/99 Compliant Super I/O Floppy Disk Controller with Infrared Support
• Manufacturer: SMSC [SMSC Corporation]

STATUS REGISTER A (SRA)
Address 3F0 READ ONLY
This register is read-only and monitors the state
of the FINTR pin and several disk interface pins,
PS/2 Mode
BIT 0 DIRECTION
Active high status indicating the direction of
head movement. A logic "1" indicating inward
direction a logic "0" outward.
BIT 1 nWRITE PROTECT
Active low status of the WRITE PROTECT disk
interface input. A logic "0" indicating that the
disk is write protected.
BIT 2 nINDEX
Active low status of the INDEX disk interface
input.
BIT 3 HEAD SELECT
Active high status of the HDSEL disk interface
input. A logic "1" selects side 1 and a logic "0"
selects side 0.
RESET
COND.
PENDING
INT
7
0
nDRV2
N/A
6
STEP
5
0
19
nTRK0 HDSEL nINDX
N/A
in PS/2 and Model 30 modes. The SRA can be
accessed at any time when in PS/2 mode. In
the PC/AT mode the data bus pins D0 - D7 are
held in a high impedance state for a read of
address 3F0.
BIT 4 nTRACK 0
Active low status of the TRK0 disk interface
input.
BIT 5 STEP
Active high status of the STEP output disk
interface output pin.
BIT 6 nDRV2
Active low status of the DRV2 disk interface
input pin, indicating that a second drive has
been installed.
BIT 7 INTERRUPT PENDING
Active high bit indicating the state of the Floppy
Disk Interrupt output.
4
3
0
N/A
2
nWP
N/A
1
DIR
0
0