M306V5EESP Mitsubishi, M306V5EESP Datasheet - Page 124

• Manufacturer Part Number: M306V5EESP
• Description: SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER with CLOSED CAPTION DECODER and ON-SCREEN DISPLAY CONTROLLER
• Manufacturer: Mitsubishi

124
Fig. 2.11.37 I
(3) I
The I
mode, the slave address written in this register is compared with the address data to be received
immediately after the START condition are detected.
Not used when comparing addresses, in the 7-bit addressing mode. In the 10-bit addressing mode,
the first address data to be received is compared with the contents (SAD6 to SAD0 + RBW) of the I
address register.
The RBW bit is cleared to “0” automatically when the stop condition is detected.
These bits store slave addresses. Regardless of the 7-bit addressing mode and the 10-bit addressing
mode, the address data transmitted from the master is compared with the contents of these bits.
Bit 0: read/write bit (RBW)
Bits 1 to 7: slave address (SAD0–SAD6)
2
Ci address register (i = 0, 1)
2
Ci address register consists of a 7-bit slave address and a read/write bit. In the addressing
_______
I
2
b7 b6 b5 b4 b3 b2 b1 b0
2
Ci address register (i = 0, 1)
Ci address register (i = 0, 1)
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER with CLOSED CAPTION DECODER
Bit Symbol
SAD0
SAD1
SAD2
SAD3
SAD4
SAD5
SAD6
RBW
IIC0S0D
IIC1S0D
Symbol
Read/write bit
Slave address
Bit name
Address
02E1
02E9
16
16
<Only in 10-bit addressing (in slave) mode>
The last significant bit of address data is
compared.
0 : Wait the first byte of slave address
1 : Wait the first byte of slave address
<In both modes>
The address data is compared.
after START condition
after RESTART condition
and ON-SCREEN DISPLAY CONTROLLER
When reset
MITSUBISHI MICROCOMPUTERS
_______
00
00
Function
16
16
M306V5ME-XXXSP
(read state)
(write state)
M306V5EESP
R W
Rev. 1.0
2
Ci